Firewire 2024: Today's Macs and Sequoia?

Moderator: James Steele

Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
User avatar
mikehalloran
Posts: 16191
Joined: Sun Jan 25, 2009 5:08 pm
Primary DAW OS: MacOS
Location: Sillie Con Valley

Re: Firewire 2024: Today's Macs and Sequoia?

Post by mikehalloran »

patthedog wrote: Wed Jan 22, 2025 1:21 am Yes, that appears to be the case. After re-enabling full security the MOTU was no longer recognised. Then when security was disabled again, it was necessary to reinstall the MOTU driver.

I notice both the TB and FW adapters become quite warm. I haven't been able to find any stats for the Ultralite's power consumption but imagine it must be quite high. Unlike USB devices, macOS System Report doesn't appear to list the current draw for Thunderbolt devices.
Reduced, not disabled.

The FireWire bus power spec was around 27W. The Apple FW-TB adapter only passes 7.7W if I’m remembering correctly—don’t know what the TB2-3 is rated. So, yeah, if bus power works at all, the adapters are going to get warm.
DP 11.34; 828mkII FW, micro lite, M4, MTP/AV USB Firmware 2.0.1
2023 Mac Studio M2 8TB, 192GB RAM, OS Sequoia 15.4, USB4 8TB externals, Neumann MT48, M-Audio AIR 192|14, Mackie ProFxv3, Zoom F3 & UAC 232 32bit float recorder & interface; 2012 MBPs (x2) Catalina, Mojave
IK-NI-Izotope-PSP-Garritan-Antares, LogicPro X, Finale 27.4, Dorico 5, Notion 6, Overture 5, TwistedWave, DSP-Q 5, SmartScore64 NE Pro, Toast 20 Pro
textiles78
Posts: 1
Joined: Sat Dec 02, 2006 10:48 am
Primary DAW OS: MacOS

Re: Firewire 2024: Today's Macs and Sequoia?

Post by textiles78 »

Wanted to thank Mike Halloran and others here for this great thread. Mac Mini M4 now running my FW 828mk2 flawlessly.

The only thing is often when I boot the computer there is a warning that the motu driver will not be functioning in a future OS update. So I guess that means they are going to cripple the FW code in the os, and if so when? I would just keep the previous version to keep my interface functioning if I knew which update to avoid...

Thanks again.
User avatar
mikehalloran
Posts: 16191
Joined: Sun Jan 25, 2009 5:08 pm
Primary DAW OS: MacOS
Location: Sillie Con Valley

Re: Firewire 2024: Today's Macs and Sequoia?

Post by mikehalloran »

there is a warning that the motu driver will not be functioning in a future OS update
That message has been popping up for awhile. Hopefully, MOTU will rewrite the driver before it comes true.
DP 11.34; 828mkII FW, micro lite, M4, MTP/AV USB Firmware 2.0.1
2023 Mac Studio M2 8TB, 192GB RAM, OS Sequoia 15.4, USB4 8TB externals, Neumann MT48, M-Audio AIR 192|14, Mackie ProFxv3, Zoom F3 & UAC 232 32bit float recorder & interface; 2012 MBPs (x2) Catalina, Mojave
IK-NI-Izotope-PSP-Garritan-Antares, LogicPro X, Finale 27.4, Dorico 5, Notion 6, Overture 5, TwistedWave, DSP-Q 5, SmartScore64 NE Pro, Toast 20 Pro
Post Reply