MOTUnation.com

... Power Mac running macOS 10.14 Mojave, with DP 11.22 as my DAW, and two PCIe-424 cards connected to eight HD192 interfaces, which are then routed into an analog mixer. ...

... Power Mac running macOS 10.14 Mojave, with DP 11.22 as my DAW, and two PCIe-424 cards connected to eight HD192 interfaces, which are then routed into an analog mixer. ...

... feeding a 2408mkIII. The ADATs feed each other clock, and feed the 2408 in parallel. An ADAT sync protocol cable goes from last ADAT to the PCIe card in the computer (card manages the DAW/2408 relationship) so I can do multiple sample accurate passes from the ADAT tape machines and the computer ...

... chip hard-wired to the switch. That way, their Thunderbolt hardware is just a bog-standard off-the-shelf retimer connected to a single-lane PCIe bus connected directly to the Broadcom chip with a 10 cent 8-bit microcontroller to handle the USB-C configuration pin handshake, similar to what ...

Hi,

The card in question is the 424-pcie card and the computer is a dual 2.7ghz g5.

Which PCI card exactly? There were three.
https://motu.com/techsupport/technotes/ ... patibility

Which G5 exactly? It makes a big difference in which of the three cards work.
https://everymac.com/systems/apple/powe ... ac-g5.html

Hi, I tried your suggestion but it made no difference. I ended up getting the cables from MOTU and now have 4 2408 units connected to the pci-424 card. My next step is to figure out how to setup everything so that I have 32 mono input/output channels across the 4 2408s available in my preferred ...

The Apple Thunderbolt Ethernet interface (BCM57762) should be AVB-capable (it's the same PCIe Ethernet chip that Sonnet uses), with the caveat that Apple's adapter forces you to use a chain of dongles, because Apple never spent the hour of engineering time to swap the ...

... operating system sees the FireWire chipset as though it were just a bog-standard FireWire card connected to a slightly-higher-than-normal-latency PCIe slot. As long as it is still possible to put a Lucent FireWire card (IIRC) into a Mac Pro and have it work, the FireWire adapter should also continue ...

Ahhh... that's an older setup, but I had a PCI-424e based system and I remember that a common issue was that when you use standard firewire cables, the metal part of the connector that plugs into the PCI-424e card doesn't go in deep enough. On the "Audiowire" cables that metal part is long...

Hi, I have a 424 pcie card for use with my dual 2.7ghz powermac g5 computer running os 10.5.8 along with a new 6pin firewire cable ...

Like the OP, I had 2 UAD Solo PCIe cards and lots of plugins. When I went from a 5,1 Mac Pro to a Mac Studio (M1 Max), I bought a Quad TB3 Satellite. Given the fact that I now have the option of using native versions of many of my UAD plugins ...

Hey Guys I'm in that situation : 2011 Mac Pro , PCIe based kit around HD192 and 2408mkIII 2 UAD cards Starting to feel the age , stuck in 10.14.... I also have a 1248 and an UltaliteAVB in my bass kit , so I would use these as my "Home base" ...

... Both OSes can see the FW card, but none can detect the MOTU thru it Card is based on Texas Instrument chip TSB43AB22A Now I've ordered another PCIe card to see. This one based on XIO2213B Which I think is better supported from what I've read But we'll see I tried opening the unit, but I can't ...

... to be a little picky when it comes to controller interfaces, even more now that has become legacy technology. So im going to try getting a new PCIe card with the recommended chip for use with modern machines. I think it narrows down to these two possibilities, either it's the card and it hope ...