Hello!
Please advise me if it is possible and if yes, how to use the microphone inputs together with the other 6 line-ins of an UltraLite-mk5 interface, in order to connect to it the pre-outs of a Dolby Atmos receiver (Marantz Cinema 70s), for a 5.1.2 configuration.
What kind of attenuator could be used?
Thank you
UltraLite-mk5: Is it possible to use the two microphone inputs with line level sources ?
Moderator: James Steele
Forum rules
Here's where to talk about preamps, cables, microphones, monitors, etc.
Here's where to talk about preamps, cables, microphones, monitors, etc.
- HCMarkus
- Posts: 9799
- Joined: Tue Jan 10, 2006 9:01 am
- Primary DAW OS: MacOS
- Location: Rancho Bohemia, California
- Contact:
Re: UltraLite-mk5: Is it possible to use the two microphone inputs with line level sources ?
See the Manual, Page 34.
https://cdn-data.motu.com/manuals/usb-c ... _Guide.pdf
Between the Gain Pot and Pad, you should be able to get the gain right for your use case.
https://cdn-data.motu.com/manuals/usb-c ... _Guide.pdf
Between the Gain Pot and Pad, you should be able to get the gain right for your use case.
- mikehalloran
- Posts: 15355
- Joined: Sun Jan 25, 2009 5:08 pm
- Primary DAW OS: MacOS
- Location: Sillie Con Valley
Re: UltraLite-mk5: Is it possible to use the two microphone inputs with line level sources ?
Searchable pdf files and tutorials are your friends.
User Guide/Manual:
https://cdn-data.motu.com/manuals/usb-c ... _Guide.pdf
Here's MOTU's Getting Started page with tutorial videos:
https://motu.com/en-us/products/gen5/ul ... g-started/
User Guide/Manual:
https://cdn-data.motu.com/manuals/usb-c ... _Guide.pdf
Here's MOTU's Getting Started page with tutorial videos:
https://motu.com/en-us/products/gen5/ul ... g-started/
DP 11.31; 828mkII FW, micro lite, M4, MTP/AV USB Firmware 2.0.1
2023 Mac Studio M2 8TB, 192GB RAM, OS Sonoma 14.5 b4, USB4 8TB external, M-Audio AIR 192|14, Mackie ProFxv3 6/10/12; 2012 MBPs Catalina, Mojave
IK-NI-Izotope-PSP-Garritan-Antares, LogicPro X, Finale 27.4, Dorico 5.2, Notion 6, Overture 5, TwistedWave, DSP-Q 5, SmartScore64 Pro, Toast 20 Pro
2023 Mac Studio M2 8TB, 192GB RAM, OS Sonoma 14.5 b4, USB4 8TB external, M-Audio AIR 192|14, Mackie ProFxv3 6/10/12; 2012 MBPs Catalina, Mojave
IK-NI-Izotope-PSP-Garritan-Antares, LogicPro X, Finale 27.4, Dorico 5.2, Notion 6, Overture 5, TwistedWave, DSP-Q 5, SmartScore64 Pro, Toast 20 Pro
Re: UltraLite-mk5: Is it possible to use the two microphone inputs with line level sources ?
Thanks for the quick answers!
I understand that you consider that an attenuator is not necessary when connecting a line level pre-out (RCA -10 dBv line level) from the receiver to the front mic/instrument inputs (via TRS). Reading in the manual, at page 23: Combo jack summary, it looks like you are right.
That is good news.
Reading
https://www.shure.com/en-US/performance ... mic-levels and https://gearspace.com/board/so-much-gea ... input.html, for example,
it seemed that the situation was not so simple.
I understand that you consider that an attenuator is not necessary when connecting a line level pre-out (RCA -10 dBv line level) from the receiver to the front mic/instrument inputs (via TRS). Reading in the manual, at page 23: Combo jack summary, it looks like you are right.
That is good news.
Reading
https://www.shure.com/en-US/performance ... mic-levels and https://gearspace.com/board/so-much-gea ... input.html, for example,
it seemed that the situation was not so simple.