ok, so the All Access direct into the Kemper is fine.
I have it set up for MIDI ch. 2, and program change numbers in increments of 6 to get to performance numbers 1,2,3, etc.
When I plug the AA into a MOTU Micro Lite, Ch. 1 is sent to MainStage and the program change numbers are 1 to 1 mapping and that works fine.
However, while there is a MIDI indicator lite for the input, nothing is showing anything going to the out ports.
I’ve gone over the AMS 100 times and can’t find my mistake.
Running an M1 MacMini, 12.4.
https://gearspace.com/board/music-compu ... i-out.html
Attached Thumbnails
All Access pedal - MOTU Micro Lite no MIDI Out-7067bca5-9e18-4906-9387-219c8da1376b.jpeg
Rocktron All Access MIDI Pedal Into Micro Lite - No MIDI Out
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
-
- Posts: 2
- Joined: Sat Dec 03, 2022 5:41 am
- Primary DAW OS: MacOS
-
- Posts: 2
- Joined: Sat Dec 03, 2022 5:41 am
- Primary DAW OS: MacOS
Re: Rocktron All Access MIDI Pedal Into Micro Lite - No MIDI Out
Same thing with a Behringer FCB1010. I’m seeing MIDI IN but PC messages are not being sent through to other hardware.