Motu 828 MkIII firewire malfunction

Moderator: James Steele

Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Post Reply
Tidwells@aol.com
Posts: 251
Joined: Tue Jun 12, 2012 10:04 pm
Primary DAW OS: Unspecified

Motu 828 MkIII firewire malfunction

Post by Tidwells@aol.com »

The other day my Motu 828 MkIII (firewire only version) quit working. When I turn it on, it starts to boot up, then after a few seconds the display gets dimmer and it gets stuck with "cue mix fx loading" on the screen and never finishes booting up. If I toggle one of the phantom power switches on and off, the display gets a little brighter when phantom power is on. I already had this unit repaired under Motu's flat fee repair program several years ago. Have they discontinued this program? If so, does anyone have any suggestions on possible do-it-myself repair attempts? Thanks in advance for your input! I CAN use a soldering iron and multimeter :-)

Doug
Top
Post Reply

Return to “MOTU Hardware & Windows”