Hi Friends!
I just moved from a good old (but yet too simple) Scarlett 2i4 to a 896mk3. The main reason behind this was to use external audio effects in Ableton, implying more I/O.
First experiment was routing audio from Behringer Odissey to Ableton, then to KT 3rd dimension chorus (through output 6) and then back in Ableton (through input 6).
But for reasons I don't understand, I need to enable mono outputs 7&8 and stereo 1/2, then audio to 8 and from 6 (this one make sens) in Ableton settings and external audio effects.
Why 7&8 and 1-2? (no sound if one of those disabled)
Why audio to 8 (and not 6)?
And why outputs always come by pairs?
[896mk3] struggling to understand how to set I/O in Ableton
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
-
tomboudiboudi
- Posts: 6
- Joined: Sun Jun 05, 2022 2:51 pm
- Primary DAW OS: Windows
-
tomboudiboudi
- Posts: 6
- Joined: Sun Jun 05, 2022 2:51 pm
- Primary DAW OS: Windows
Re: [896mk3] struggling to understand how to set I/O in Ableton
Just understood that Main Outs 1-2 stereo outs are the reason why all Outputs gets 2 slots stagerred in Ableton (output 1 is actually 3, 2 is 4 and so on).
I managed to get this working as I intended to, but is there any way to fix this in 896mk3 settings/console/cuemix ? As 896 output 1 became actual output 1 in Ableton, and not 3 ?
I managed to get this working as I intended to, but is there any way to fix this in 896mk3 settings/console/cuemix ? As 896 output 1 became actual output 1 in Ableton, and not 3 ?