CueMix DSP EQ render master bus???

Here's where to talk about preamps, cables, microphones, monitors, etc.

Moderator: James Steele

Forum rules
Here's where to talk about preamps, cables, microphones, monitors, etc.
Post Reply
nordlead26
Posts: 13
Joined: Tue Sep 29, 2020 5:22 am
Primary DAW OS: Windows

CueMix DSP EQ render master bus???

Post by nordlead26 »

Hi,

I was wondering, how can I render the DSP Fx such as the EQ integrated in MOTU 828x in CueMix?

I want to use this in the main output of my DAW (Cubase 9.5) ... and also could be good to know if there is a way to use in a group channel from Cubase?

In simple words, I want to use as part of the mastering chain or as part of my mixing process... is it possible?
Top
nordlead26
Posts: 13
Joined: Tue Sep 29, 2020 5:22 am
Primary DAW OS: Windows

Re: CueMix DSP EQ render master bus of DAW???

Post by nordlead26 »

wow... this forum seems to be very active... :dance:
Top
User avatar
HCMarkus
Posts: 9759
Joined: Tue Jan 10, 2006 9:01 am
Primary DAW OS: MacOS
Location: Rancho Bohemia, California
Contact:
Contact HCMarkus

Re: CueMix DSP EQ render master bus of DAW???

Post by HCMarkus »

nordlead26 wrote:wow... this forum seems to be very active... :dance:
Maybe nobody does this. :D

That said, if not possible in software, you could loop back using ADAT ports. Properly routed, this should enable you to accomplish your goal.

PS: Flies with honey, remember?
Top
User avatar
bayswater
Posts: 11975
Joined: Fri Feb 16, 2007 9:06 pm
Primary DAW OS: MacOS
Location: Vancouver

Re: CueMix DSP EQ render master bus???

Post by bayswater »

You will probably find what you want in the CueMix manual under "return channels".
2018 Mini i7 32G 10.14.6, DP 11.3, Mixbus 9, Logic 10.5, Scarlett 18i8
Top
nordlead26
Posts: 13
Joined: Tue Sep 29, 2020 5:22 am
Primary DAW OS: Windows

Re: CueMix DSP EQ render master bus of DAW???

Post by nordlead26 »

HCMarkus wrote:
nordlead26 wrote:wow... this forum seems to be very active... :dance:
Maybe nobody does this. :D

That said, if not possible in software, you could loop back using ADAT ports. Properly routed, this should enable you to accomplish your goal.

PS: Flies with honey, remember?
So is a fact this DSP MOTU FX cannot be used in any software without looping back the ports? :(

in such a case seems to be a pretty wasted features and it would be disappointing... :boohoo:
Top
nordlead26
Posts: 13
Joined: Tue Sep 29, 2020 5:22 am
Primary DAW OS: Windows

Re: CueMix DSP EQ render master bus???

Post by nordlead26 »

bayswater wrote:You will probably find what you want in the CueMix manual under "return channels".
there is no page or section pointing to "return channels"

https://cdn-data.motu.com/manuals/thund ... al_Win.pdf
Top
User avatar
bayswater
Posts: 11975
Joined: Fri Feb 16, 2007 9:06 pm
Primary DAW OS: MacOS
Location: Vancouver

Re: CueMix DSP EQ render master bus???

Post by bayswater »

It appears in mine. And in this one on page 3

https://cdn-data.motu.com/manuals/firew ... _Guide.pdf
2018 Mini i7 32G 10.14.6, DP 11.3, Mixbus 9, Logic 10.5, Scarlett 18i8
Top
nordlead26
Posts: 13
Joined: Tue Sep 29, 2020 5:22 am
Primary DAW OS: Windows

Re: CueMix DSP EQ render master bus???

Post by nordlead26 »

bayswater wrote:It appears in mine. And in this one on page 3

https://cdn-data.motu.com/manuals/firew ... _Guide.pdf


Uhm ... but yours is MicroBook II, this feature is supposed to be there...

https://motu.com/products/motuaudio/mic ... ixing.html

On 828x some adjustments should be made if possible... and I don't know if it's possible without wires...
Top
User avatar
bayswater
Posts: 11975
Joined: Fri Feb 16, 2007 9:06 pm
Primary DAW OS: MacOS
Location: Vancouver

Re: CueMix DSP EQ render master bus???

Post by bayswater »

nordlead26 wrote:
bayswater wrote:It appears in mine. And in this one on page 3

https://cdn-data.motu.com/manuals/firew ... _Guide.pdf


Uhm ... but yours is MicroBook II, this feature is supposed to be there...

https://motu.com/products/motuaudio/mic ... ixing.html

On 828x some adjustments should be made if possible... and I don't know if it's possible without wires...
I don't have a micro book. I have two other MOTU units (no longer in regular use). I would have thought this is a cuemix feature, since it has no hardware aspects. It just publishes the name of a virtual input. If there is no virtual input, you'd have use a physical input.
2018 Mini i7 32G 10.14.6, DP 11.3, Mixbus 9, Logic 10.5, Scarlett 18i8
Top
User avatar
HCMarkus
Posts: 9759
Joined: Tue Jan 10, 2006 9:01 am
Primary DAW OS: MacOS
Location: Rancho Bohemia, California
Contact:
Contact HCMarkus

Re: CueMix DSP EQ render master bus???

Post by HCMarkus »

nordlead26 wrote:
bayswater wrote: I don't know if it's possible without wires...
Optical cables are not wires. :dance:

:sorry:
Top
nordlead26
Posts: 13
Joined: Tue Sep 29, 2020 5:22 am
Primary DAW OS: Windows

Re: CueMix DSP EQ render master bus???

Post by nordlead26 »

HCMarkus wrote:
nordlead26 wrote:
bayswater wrote: I don't know if it's possible without wires...
Optical cables are not wires. :dance:

:sorry:
English barrier... translated in Spanish wires and cables means the same thing... BUT

I was talking about TRS multi-conductor cables, not optical....


to add a little more to your comment because was interesting:

Different uses of Wire and Cable

Use of Wire

A wire is used to carry electricity, to bear the mechanical loads, to transmit telecommunication signals, for heating jewellery, clothing, automotive or any industrial manufactured parts like pins, bulbs and needles.

Use of Cable

A cable is used for power transmission, for telecommunication signals or to carry electricity.

https://finolex.com/whats-the-basic-dif ... nd-cables/

:koolaid:
Top
Post Reply

Return to “General Recording”