UltraLite MK3 & Windows 10 - no sound - RESOLVED
Posted: Sun Oct 29, 2017 6:16 am
Hi all,
I hope you can help me as this is the last resort before I have to return the UltraLite mk3 Hybrid I recently bought. Frustrating because I've never had issues with soundcards before, having owned quite a few...
Anyway, I'm unable to get it to actually pass through any sound. I'm running a Windows 10 64-bit system (latest updates and all). No matter what I do, whether it's from the DAW or a video online or a music clip, I can't hear any sound. I normally use headphones.
This is what I've tried so far:
- Upgrading the firmware of the hardware itself
- Reinstalling the latest Win 10 drivers from MOTUs site
- Factory reset of the unit
- Made sure that "Phones" should use Main Out 1-2 (I've assigned it both on the unit and in the MOTU Audio console)
- In Windows, made sure that "Main Out 1-2" is the preferred audio device for playback
But there's NOTHING going on. If I try to play a local mp3 it won't even start the playback so it feels like the drivers are somehow corrupted? I can also see when clicking the speaker icon in Windows that it "jumps around" between the different outputs on the MOTU card, without me doing anything at all.
I'm unsure what to do, I'd really appreciate any help as I was reading so much good about MOTU but I've had 3 different USB-soundcards before and they all worked within 5 minutes of setting them up so I'm stumped.
Edit:
Also tried the following things, no dice:
- Followed the instructions here: viewtopic.php?f=14&t=36522&start=30
- Tried all sample rates (44.1 and 48 included)
- Ensured I have it connected to a USB 2.0 port (have tried 3.0 as well though)
- Tried a different USB cable, because why not...
I'm out of ideas. As I said before the edit this is the first time I've ever encountered such an issue with any of the gear I've owned and it's very frustrating.
I hope you can help me as this is the last resort before I have to return the UltraLite mk3 Hybrid I recently bought. Frustrating because I've never had issues with soundcards before, having owned quite a few...
Anyway, I'm unable to get it to actually pass through any sound. I'm running a Windows 10 64-bit system (latest updates and all). No matter what I do, whether it's from the DAW or a video online or a music clip, I can't hear any sound. I normally use headphones.
This is what I've tried so far:
- Upgrading the firmware of the hardware itself
- Reinstalling the latest Win 10 drivers from MOTUs site
- Factory reset of the unit
- Made sure that "Phones" should use Main Out 1-2 (I've assigned it both on the unit and in the MOTU Audio console)
- In Windows, made sure that "Main Out 1-2" is the preferred audio device for playback
But there's NOTHING going on. If I try to play a local mp3 it won't even start the playback so it feels like the drivers are somehow corrupted? I can also see when clicking the speaker icon in Windows that it "jumps around" between the different outputs on the MOTU card, without me doing anything at all.
I'm unsure what to do, I'd really appreciate any help as I was reading so much good about MOTU but I've had 3 different USB-soundcards before and they all worked within 5 minutes of setting them up so I'm stumped.
Edit:
Also tried the following things, no dice:
- Followed the instructions here: viewtopic.php?f=14&t=36522&start=30
- Tried all sample rates (44.1 and 48 included)
- Ensured I have it connected to a USB 2.0 port (have tried 3.0 as well though)
- Tried a different USB cable, because why not...
I'm out of ideas. As I said before the edit this is the first time I've ever encountered such an issue with any of the gear I've owned and it's very frustrating.