Hardware/Software set up 828 Hybrid, Mac El Capitan
Posted: Fri May 26, 2017 12:20 am
Fairly new with the Motu interfaces. Previously had an Ultralite AVB (couldn't get my head around it) and saw an 828 for cheap so with that now.
I want to set the 828 hybrid up, so that I can work within reason 9 and ableton. More importantly, I want to get sound out of my Interface, to my external mixer, to run through multiple effects (RE-201, Strymon's, Dawson 1978, etc), and then back to the Motu without creating any feedback.
Previously did this on smaller soundcards i.e. Saffire Pro 24, but can't work this one out as the Output on the back (Analog 1-2) isn't sending any signal to my mixer.
My synthesizers are sending clean signal to the mixer connected through Mic 1&2 fine, but I want what's playing from my computer to go to my outboard effects and back to the interface to record.
Anyone who can lend a hand with some info, it would be massively appreciated.
If anything needs to be clarified as well, let me know!
I want to set the 828 hybrid up, so that I can work within reason 9 and ableton. More importantly, I want to get sound out of my Interface, to my external mixer, to run through multiple effects (RE-201, Strymon's, Dawson 1978, etc), and then back to the Motu without creating any feedback.
Previously did this on smaller soundcards i.e. Saffire Pro 24, but can't work this one out as the Output on the back (Analog 1-2) isn't sending any signal to my mixer.
My synthesizers are sending clean signal to the mixer connected through Mic 1&2 fine, but I want what's playing from my computer to go to my outboard effects and back to the interface to record.
Anyone who can lend a hand with some info, it would be massively appreciated.
If anything needs to be clarified as well, let me know!