Hey stupid question probably but:
How do I get adat outputs to show on the Cuemix5 as stereo mixes? Currently it only shows Main 1-2, Phones 1 and 2 and Lines 3-4, 5-6, 7-8 and 9-10. So I'm getting mains and then separate monitor mixes for 6 musicians, but shouldn't I also be able to create separate mixes for my adat outs somehow when ever I'm having more than 6 folks recording at the studio?
new 828, Mac M1 and Cuemix5 adat outputs
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
- HCMarkus
- Posts: 9799
- Joined: Tue Jan 10, 2006 9:01 am
- Primary DAW OS: MacOS
- Location: Rancho Bohemia, California
- Contact:
Re: new 828, Mac M1 and Cuemix5 adat outputs
How many Stereo Buses does the 828 provide? It may be limited to eight, and it looks like you have that many is use already...
If this is the case, you can either go with a few mono mixes or have some players share a mix.
If this is the case, you can either go with a few mono mixes or have some players share a mix.
HC Markus
M1 Mac Studio Ultra • 64GB RAM • 828es • macOS 13.6.4 • DP 11.31
M1 Mac Studio Ultra • 64GB RAM • 828es • macOS 13.6.4 • DP 11.31