I am a very confused and I have some doubts regarding the ADAT configuration between a MOTU 828 MKII and a MOTU 828 X, in which I have only one ADAT cable connected, so the 828 X would be the slave and MKII the satelite according to the specifications of this article.
https://motu.com/techsupport/technotes/ ... lexpansion
However although I have managed to communicate the two interfaces following the instructions of the article above, in the CueMix of the 828 X, I can see the ADAT optical A and optical B, but when I connect a sitetizador in the inputs of the 828 MKII, I get no sound in the 828 X although I see how the leds turn on in the MKII...
What am I doing wrong or what do I need to connect or configure? should I connect the Main Outs of the MKII or something like that? Isn't the 828 MKII supposed to function as an expansion?
MOTU ADAT questions / MOTU 828 MKII and 828 X
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
-
- Posts: 13
- Joined: Tue Sep 29, 2020 5:22 am
- Primary DAW OS: Windows