Hi all
I have a Motu 4PRE to use it with 4 mics input, and few days ago it rebooted due to power outage. Hardware is fine but i lost the configuration i set before !
- previously, i had the 4 mics going independently to out 1,2,3,4 so mic1 => out1 , mic2 => out2... mic3 => out3 so i can plug out1,2,3,4 to my MOTU Ultalite AVB
- now, i have the 4 mic on the Motu4pre mixed weird : mic1+3 are on out1 and mic2+4 are on out2.
- tried to change different settings on CueMix and got mic1+3 on out3 and mic2+4 on out4 !!!
Can't find the way to dissociate the 4 mix anymore so they goes unmixed un each output jack. I remember i enabled Stereo on all mics but still weird.
Anyone may help or have the correct configuration settings ?
best regards
Will save my headache
Motu 4PRE CueMix configuration
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows