Negative Harmony: concept & application in DP

Discussions about composing, arranging, orchestration, songwriting, theory, etc...

Moderators: Frodo, FMiguelez, MIDI Life Crisis

Forum rules
Discussions about composing, arranging, orchestration, songwriting, theory and the art of creating music in all forms from orchestral film scores to pop/rock.
Post Reply
User avatar
stubbsonic
Posts: 4601
Joined: Fri Dec 22, 2006 12:56 pm
Primary DAW OS: MacOS
Contact:

Negative Harmony: concept & application in DP

Post by stubbsonic »

After watching Jacob Collier's quick interview with its very brief and vague description of negative harmony, it occurred to me that DP's transpose note-mapping system could be used to interesting effect to develop interesting alternative harmonic content.

If I understand it correctly, the idea is that within a key center, every note above a "center pitch" has a mirror note the same distance below that center pitch with equal "gravity". So you could replace each note with its mirror reflection below that center point and have the same amount of tension but with a different quality. The results are pretty pleasing.

One thing that kind of struck me as odd was that the "center" over which notes were flipped was the midpoint between the tonic and the dominant note (halfway between b3 and 3). The obvious question to me was why not just call the tonic the center? Perhaps that has already been discussed. This concept is very new to me. I guess one advantage is with a non-note center, then every note has a replacement. With a tonic center, the tonic note itself is never replaced and has no negative.

If the tonic is one center and the dominant is another center, then the mid-point between them is yet another center-- one could experiment with what results these produce and pick a fave.

Obviously, these kinds of abstract "contraptions" are just ways to deconstruct and reconstruct music. This one does seem to create something oddly satisfying.

Any thoughts?
Last edited by stubbsonic on Thu May 11, 2017 1:31 pm, edited 1 time in total.
M1 MBP; OS 12, FF800, DP 11.3, Kontakt 7, Reaktor 6, PC3K7, K2661S, iPad6, Godin XTSA, Two Ibanez 5 string basses (1 fretted, 1 fretless), FM3, SY-1000, etc.

http://www.jonstubbsmusic.com
User avatar
stubbsonic
Posts: 4601
Joined: Fri Dec 22, 2006 12:56 pm
Primary DAW OS: MacOS
Contact:

Re: Negative Harmony: concept & application in DP

Post by stubbsonic »

The Invert Pitch command could be useful for this type of re-harmonization. However, with this specific "negative harmony", you don't have a "center pitch"which is required by the Invert Pitch process. Rather, you have a center that is at the half-point between two semitones. Think of the gap between two notes as the center.

So if you are in the key of Db, the center point is halfway between Db & Ab, which is between F & Fb (E). So going outward from there:

F -> E
F# -> Eb
G -> D
Ab -> C#
A -> C
etc.

So Invert Pitch won't work for this version of Negative Harmony. However, Transpose with a custom map will work. In creating the "Negative Harmony" map, rather then sending notes to literal inversions of a single center (going ever outward), little octave corrections could be employed so that the furthest any note would move would be a tritone.

And rather then setting up a separate map for 12 possible "between key" centers, a person could shift the tracks pre and post remapping so that only one remap is needed. If you made a Key of X major "negative harmony" remap, you could take any piece and drag it to the key of X first, then remap, then drag it the same amount back to your original key.

While we're on this topic, a person could create a few different kinds of re-maps like this with note-for-note substitutions based on some other kinds of patterns and use it as a harmonic dice roll, if you're into that sort of thing.
M1 MBP; OS 12, FF800, DP 11.3, Kontakt 7, Reaktor 6, PC3K7, K2661S, iPad6, Godin XTSA, Two Ibanez 5 string basses (1 fretted, 1 fretless), FM3, SY-1000, etc.

http://www.jonstubbsmusic.com
User avatar
nk_e
Posts: 925
Joined: Wed Jul 04, 2007 5:04 am
Primary DAW OS: MacOS
Location: USA
Contact:

Re: Negative Harmony: concept & application in DP

Post by nk_e »

Is there a link to the original discussion/presentation by this guy? Thx.

10 core iMacPro | 64 GB RAM | OS 12.6.7 | LOGIC PRO | STUDIO ONE 6 | CUBASE 12 | BITWIG 5 | DP 11 | MOTU Interfaces | Waaay Too Many Plug-ins |

http://www.gesslr.com

User avatar
stubbsonic
Posts: 4601
Joined: Fri Dec 22, 2006 12:56 pm
Primary DAW OS: MacOS
Contact:

Re: Negative Harmony: concept & application in DP

Post by stubbsonic »

nk_e wrote:Is there a link to the original discussion/presentation by this guy? Thx.
First, you can watch this. He touches on some complicated topics in a very brief way, but it is entertaining just to hear how his mind works.

https://www.youtube.com/watch?v=DnBr070vcNE

Next, just go and watch some of Jacob's videos. Fascinating Rhythm is fun. They are all quite good.

After that, you can see this one which explains it a little more clearly:

https://www.youtube.com/watch?v=MWKiOyMohkY

Here, Jacob goes into some more difficult explanations. He's not very good at dumbing anything down. But it is interesting, just the same.

https://www.youtube.com/watch?v=e2nUoq3AqjA

The choice of putting the center of gravity between b3 and 3 seems to do what it is supposed to. The other feature of the chords containing similar intervalic tension seems important. However, the idea of imposing other centers also seems intriguing since it may do something akin to "Negative Harmonic Modes". I'll leave there because I'm way out of my depth.
M1 MBP; OS 12, FF800, DP 11.3, Kontakt 7, Reaktor 6, PC3K7, K2661S, iPad6, Godin XTSA, Two Ibanez 5 string basses (1 fretted, 1 fretless), FM3, SY-1000, etc.

http://www.jonstubbsmusic.com
User avatar
nk_e
Posts: 925
Joined: Wed Jul 04, 2007 5:04 am
Primary DAW OS: MacOS
Location: USA
Contact:

Re: Negative Harmony: concept & application in DP

Post by nk_e »

Thank you!

10 core iMacPro | 64 GB RAM | OS 12.6.7 | LOGIC PRO | STUDIO ONE 6 | CUBASE 12 | BITWIG 5 | DP 11 | MOTU Interfaces | Waaay Too Many Plug-ins |

http://www.gesslr.com

User avatar
terrybritton
Posts: 1117
Joined: Thu Jun 04, 2015 8:45 am
Primary DAW OS: Windows
Location: Elizabeth City, NC
Contact:

Re: Negative Harmony: concept & application in DP

Post by terrybritton »

This is fantastic stuff, stubbsonic!

I especially enjoyed the things he said at the end of the last video you posted above. They got to the "heart" of the subject of music making rather well, I thought.

His philosophy of "light" and "dark" directions is interesting. Nice to see he can articulate it so well to others.

Kyle's explanation of negative harmony was well done also in the second video you posted. I'd been messing with this kind of thing for years, but never gave it much thought as to its theoretical basis and where that might take me even deeper.

I'm watching more videos on this stuff - thanks for getting me started and wetting my appetite!

Terry
Computer: Sweetwater CS400v7 Intel Core i7-10700K CPU @ 3.80GHz | 64Gigs RAM | Windows 11 Pro x64 |
MOTU 828 mk3 hybrid

DAWs & Live: MOTU Digital Performer 11.31 | Cantabile Performer 4
Keyboard Synths: Kawai K5000s, Korg Wavestation
Controllers: NI Komplete Kontrol S-88 Mk3 & S-49 Mk2; Maschine Mk3 & JAM;
Akai MPK249 & 225, Alesis QX49, Behringer BCF2000 & FCB1010
Rack Modules: Ensoniq ESQm, Yamaha TX81Z, Wavestation SR

Tutorials: https://youtube.com/@CreatorsMediaTools
User avatar
stubbsonic
Posts: 4601
Joined: Fri Dec 22, 2006 12:56 pm
Primary DAW OS: MacOS
Contact:

Re: Negative Harmony: concept & application in DP

Post by stubbsonic »

terrybritton wrote:
I especially enjoyed the things he said at the end of the last video you posted above. They got to the "heart" of the subject of music making rather well, I thought.

His philosophy of "light" and "dark" directions is interesting. Nice to see he can articulate it so well to others.

Terry
Same here. This has sparked new interest. I rather like the idea of taking existing harmony, running it through a process and generating some different but still useful sounds. This isn't a world I've tinkered with, so now I want to mess with it.
M1 MBP; OS 12, FF800, DP 11.3, Kontakt 7, Reaktor 6, PC3K7, K2661S, iPad6, Godin XTSA, Two Ibanez 5 string basses (1 fretted, 1 fretless), FM3, SY-1000, etc.

http://www.jonstubbsmusic.com
User avatar
stubbsonic
Posts: 4601
Joined: Fri Dec 22, 2006 12:56 pm
Primary DAW OS: MacOS
Contact:

Re: Negative Harmony: concept & application in DP

Post by stubbsonic »

Here's a feature request that MOTU would probably never do, but it would arguably be pretty easy:

For their PITCH INVERT process, where they offer the center pitch they could essentially add a "note-pair" center option. So when choosing a center, it could go
C
C/C#
C#
C#/D
D
D/Eb
Eb

etc.

When a note-pair is chosen, the juncture between those notes is the center. And so in the case of C/C# all C's become C#s and vice versa-- radiating out from there.
M1 MBP; OS 12, FF800, DP 11.3, Kontakt 7, Reaktor 6, PC3K7, K2661S, iPad6, Godin XTSA, Two Ibanez 5 string basses (1 fretted, 1 fretless), FM3, SY-1000, etc.

http://www.jonstubbsmusic.com
Post Reply