Noisy Outputs on 828mk3 Hybrid
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Noisy Outputs on 828mk3 Hybrid
Has anyone ever had any issue with noisy outputs on a 828 mk3 Hybrid? My studio monitors and stage speakers are quite without any cables connected to the inputs. When they connect the speakers to the interface, I get a lot of hiss. I thought the 828mk3 Hybrid was suppose to be pretty quite on the output side. Thoughts?
-
- Posts: 1176
- Joined: Sat Oct 16, 2004 10:01 pm
- Primary DAW OS: MacOS
- Location: Nordring 38, CH - 3013 Berne
Re: Noisy Outputs on 828mk3 Hybrid
I am feeding Crest Pro 7200 / EV Monitors with the 896mk3H and have very low hiss...
Did you check Cuemix FX that there is no mixing going on with a lot of gain ?
best
Klaus
Did you check Cuemix FX that there is no mixing going on with a lot of gain ?
best
Klaus
-
- Posts: 2339
- Joined: Sun Oct 31, 2004 10:01 pm
- Primary DAW OS: MacOS
- Location: Box, Wiltshire, UK
- Contact:
Re: Noisy Outputs on 828mk3 Hybrid
Check CueMix to see of there are any open noisy inputs
Cheers
SWT
(snap!!)
Cheers
SWT
(snap!!)
Stephen W Tayler: Sound Artist
http://www.chimera-arts.com
http://ostinatomusic.com
http://stephentayler.com
Mac Pro 16Gb RAM, OSX 10.10, DP 8, PT 11, Logic 9.1.8, MOTU Traveler, Ultralite Mk 3 Hybrid, MC MIx, MOTU VIs, Waves, Izotope Everything, Spectrasonics, SoundToys, Slate, Softube, NI , spl Surround Monitor Controller, spl Auditor Headphone amp, Genelec 1031A, 1029 5.1 system, Sontronics Mics, iPad etc..
http://www.chimera-arts.com
http://ostinatomusic.com
http://stephentayler.com
Mac Pro 16Gb RAM, OSX 10.10, DP 8, PT 11, Logic 9.1.8, MOTU Traveler, Ultralite Mk 3 Hybrid, MC MIx, MOTU VIs, Waves, Izotope Everything, Spectrasonics, SoundToys, Slate, Softube, NI , spl Surround Monitor Controller, spl Auditor Headphone amp, Genelec 1031A, 1029 5.1 system, Sontronics Mics, iPad etc..
Re: Noisy Outputs on 828mk3 Hybrid
Yeah, I checked that and still a lot of hiss from every output. This is with or without a computer connected.Klaus wrote:I am feeding Crest Pro 7200 / EV Monitors with the 896mk3H and have very low hiss...
Did you check Cuemix FX that there is no mixing going on with a lot of gain ?
best
Klaus
Re: Noisy Outputs on 828mk3 Hybrid
All inputs on every bus are muted, still a lot of hiss. I have a power conditioner above the MOTU and I have even tried taking it out so that the MOTU is the only thing in the rack. I have also tried to plug straight into wall power and still a lot of hiss on every bus output. Not sure yet if its the unit or not. Trying to figure out other tests to do before I contact support.stephentayler wrote:Check CueMix to see of there are any open noisy inputs
Cheers
SWT
(snap!!)
Re: Noisy Outputs on 828mk3 Hybrid
If its coming from all outputs could be a possible ground loop?
I've got an 828mk3 and its close to dead quite.
Could be a bad unit.
I've got an 828mk3 and its close to dead quite.
Could be a bad unit.
MacPro 3.2 ghz 8 core 12gig,DigimaxFS, 2408mk3,8Pre,828mk3,Ozone5,MachFive3, BFD2, Sampletank2,DP8.+,Sampletron,Nectar,Central Station,D5s,Q10s.plus stuff.
Re: Noisy Outputs on 828mk3 Hybrid
I can check with a ground adapter. True, it could be a bad unit. It is really clean and quite from the headphone outs though.wylie1 wrote:If its coming from all outputs could be a possible ground loop?
I've got an 828mk3 and its close to dead quite.
Could be a bad unit.