My Ultralite MK1 works on my macbook pro under both OSX and Windows 7 but, my desktop PC doesn't recognise it.
It gets power via firewire400 cable from my pc, but device manager doesn't make any reaction when I turn it on and off.
In the device manager I can see there is a firewire port installed (IEE 1394 OHCI Compliant Host Controller)
My mainboard is ASUS P6T and it has got a VIA IEE 1394 chipset for firewire port.
I update my motu's firmware with my macbook pro(in windows mode) but no change.
ULTRALITE MK1 PROBLEM !
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
-
- Posts: 2
- Joined: Wed Apr 04, 2012 7:17 pm
- Primary DAW OS: Unspecified
Re: ULTRALITE MK1 PROBLEM !
Hey...
There could be something physically wrong with the port, but if not, this should set it well. 2nd post in the thread:
http://www.motunation.com/forum/viewtop ... 14&t=49576
There could be something physically wrong with the port, but if not, this should set it well. 2nd post in the thread:
http://www.motunation.com/forum/viewtop ... 14&t=49576