Problem with Nord rack2

[sixbong]

Hello.
Can anyone teach me how to get all the programs
from nord rack2?
I don't even want to bother performance.
Just programs....
It's working good with my JP-8000...

Powerbook1.5, DP4.5 Unisyn 2.1.1, Microlite.

Thanks in advanced.
Jin

<small>[ November 03, 2004, 11:06 AM: Message edited by: sixbong ]</small>

[Shooshie]

Not having one, that would be hard for me to do. But have you looked at the instructions in the Profile Help? Go to the device window (Command-M), and double click on the device name Nord Lead/Rack? Or Nord Lead 2? Not sure what is the exact device for that box.

Then when the little window opens for that device, click the "Help" button midway down on the right. That opens the profile where all the instructions are. Does that help? Or are you saying that there is no profile for your exact device? Try the profile for Nord Lead/Rack. That may be the one that gets you the farthest.

Shooshie

[sixbong]

I think I tried all the things I can.
I tried lord lead 2 and nord/rack both.
I checked profile help.
I found some good tips but it still doesn't work....
.....

Anyone using lord rack 2 with unisyn?

<small>[ November 04, 2004, 01:32 AM: Message edited by: sixbong ]</small>

[Shooshie]

General suggestions for any synth:

••• make sure it's not in "omni" mode, but is transmitting on channel 1.
••• make sure the device ID number matches on both Unisyn and the device. (usually it's 1)
••• make sure there is not a "thru" feature that echoes back on the "out" port.

Those can sometimes throw a synth out-of-whack with Unisyn.

Shooshie