I've got a new ADAT HD and I've connected the lightpipe output from my 8Pre to the optical inputs 9-16 on the ADAT HD and it works fine. I can put a signal into an 8pre channel and it shows up on the proper channel on the ADAT HD. I would also like to use my 2408mk3 8 analog inputs and have them show up on channels 1-8 on the ADAT HD using the optical ADAT output from the 2408mk3 bank A. The best I've been able to do is to put a signal into analog input 3 on the 2408mk3 and it appears on channel 3 and 4 simultaneously on the ADAT HD. Im missing something fundamental that I guess I can't find on the Cuemix application. Any thoughts to point me in the right direction?
Thanks...dacoppess
8Pre 2408Mk3 ADAT HD - Resolved
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows