So confused. Here's my configuration:
The XT is connected via USB to my PC and SONAR 6, and clockworks is installed.
Yamaha MO8 keyboard/controller (plugged into XT 1 in and out)
Yamaha TG500 (sound module - plugged into XT 2 in and out)
Yamaha RM50 (drum module - plugged into XT 3 in and out)
I want to be able to control the TG500 and RM50 with the MO8.
How do I set this up in Clockworks? What do I click on in the Routings tab? And will that always stay that way or do I have to reset it each time?
Also, do I have to set anything else?
Thanks,
Bruce
Express XT USB Setup
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
I've set up a series of screen shots that help illustrate my questions. I really hope you can help...
http://exploringconsciousness.com/studiosetup1.htm
http://exploringconsciousness.com/studiosetup1.htm