hi eeverybody
it hapens that the interface 828 (old) "give up" wthout any reason....
i'm sending out some sounds (Max-msp or Logic, for exemple) and without warning the interface cut everything.
i can see te sound in te computer, but no lights on the interface..
there are some problems with the drivers UB for the MOTU 828 first version?
thank you
lorbi
828 / mac pro
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
- daniel.sneed
- Posts: 2241
- Joined: Sun Jan 23, 2005 10:01 pm
- Primary DAW OS: MacOS
- Location: France
- Contact:
I get this at startup sometimes.
My workaround is changing clock back and forth to another valid source.
i.e.
no sound at startup with clock on "internal"
I change source to "spdif" (it recieves my Yam 01v)
change again to "internal" : et voilà .
My workaround is changing clock back and forth to another valid source.
i.e.
no sound at startup with clock on "internal"
I change source to "spdif" (it recieves my Yam 01v)
change again to "internal" : et voilà .
dAn Shakin' all over!
DP11.31, OS12.7.4, MacBookPro-i7-3.1Ghz-16GoRam-1ToSSD
Falcon, Kontakt, Ozone, RX, Unisum & Michelangelo, LX480
Waldorf Iridium & STVC & Blofeld, Kemper Profiler Stage, EWIusb, Studiologic VMK, ControlPad
JBL4326+4312sub, Behringer X32rack
Many mics, mandolins, banjos, guitars, flutes, melodions, xylos, kalimbas...
DP11.31, OS12.7.4, MacBookPro-i7-3.1Ghz-16GoRam-1ToSSD
Falcon, Kontakt, Ozone, RX, Unisum & Michelangelo, LX480
Waldorf Iridium & STVC & Blofeld, Kemper Profiler Stage, EWIusb, Studiologic VMK, ControlPad
JBL4326+4312sub, Behringer X32rack
Many mics, mandolins, banjos, guitars, flutes, melodions, xylos, kalimbas...
Mac pro and cut out
I have the same problem MAC PRO 2X2.66 I have bought a PCI express card to us ea different and independant slot for the FW but it still cut out for no reason
I am tired with it thinking of buyong a RME
I am tired with it thinking of buyong a RME