Hi guys,
I have a 24ai that I use as a standalone mixer. I have a old behringer adat device attached for main out + efx sends. the setup works pretty well.
but i'd like to upgrade the output from the 48khz behringer to 96khz or above. I was thinking of adding an ultralite avb which gives me some nice inputs as well.
but i'm unsure how it would work with the internal mixers on both. so would need to send efx sends from the 24ai to be mixed in with any efx needed on the inputs of the ultralite, out and back to the main mix etc.
how does it work like this? don't want to put a computer in mix.
thanks
dan
avb and internal mixing
Moderator: James Steele
Forum rules
The forum for petitions, theoretical discussion, gripes, or other matters outside deemed outside the scope of helping users make optimal use of MOTU hardware and software. Posts in other forums may be moved here at the moderators discretion. No politics or religion!!
The forum for petitions, theoretical discussion, gripes, or other matters outside deemed outside the scope of helping users make optimal use of MOTU hardware and software. Posts in other forums may be moved here at the moderators discretion. No politics or religion!!