CueMix FX not showing any meters

[Melba]

Hi everybody,

I had exactly the same problem on my 828 MkIII, spent several hours on it and found out at least the solution that works for me: play with the 'Sample Per Buffer' from the Motu Audio Console.

In my case, when selecting 96 Khz and S/PDIF as Master Clock Source, the default buffer size was set automatically to 1024. I didn't notice it.
The CueMix input meters were inactive and my DAW couldn't record anything.
By simply manually switching from 1024 to 2048, Bingo! It works now!

Hope this helps...

[FrankSharp]

Hi everyone,

had the same problem.
Everything worked fine out of the box.
Took my UltraLitemk3 hybrid with me to a rehearsal, used it as a standalone mixer; edited some reverb amount..
Back home connected it (USB).. no meters... everything else worked fine.
.besides: the input level in my DAW (Cubase) was much lower.
Read all the posts here.. tried to change sample buffer/rate and so on..
Restarted my PC!!! No luck.. so I prepared for the reinstall solution on next day after I tried the changing sample rate suggestion and some more..
Next day switched on my PC again:
Everything worked like expected and like before.
SO.. I didn't change anything, a restart of my PC didn't help.
Just switching off my PC and start it the next day did the trick.
Also... this time I switched on my mk3 before I turned on my PC.. not sure if this made the difference...

Means I can confirm that this problem exists (on my Windows PC and as I read also on Mac OS.. that's why I post it here because this was the first thread I found when searching the internet)
..and hope this helps somebody before he does the reinstall procedure..
Cheers..

[CDinkle]

Hello internet strangers. Windows 10, R3AP3R.

I had the same problem: meters weren't showing on CueMix or my DAW, but were showing on my LCD display.

Restarted Ultralite, nothing.
Restarted DAW, nothing.
Restarted computer, everything works.

Good luck out there.