Hardware outputs not detected?

For seeking technical help with Digital Performer and/or plug-ins on Windows.

Moderator: James Steele

Forum rules
This forum is for seeking solutions to technical problems involving Digital Performer and/or plug-ins on Windows, as well as feature requests, criticisms, comparison to other DAWs.
Post Reply
User avatar
Kev
Posts: 21
Joined: Thu Dec 07, 2017 7:13 pm
Primary DAW OS: Windows
Location: Victoria, Australia

Hardware outputs not detected?

Post by Kev »

My audio interface has more than one stereo out, but DP is apparently only seeing the first one, as far as I can tell. The "Configuring Audio Devices" chapter in the Getting Started manual doesn't seem to cover this issue. Any suggestions?
Occasional user of DP(v9.52), Mainly using Cakewalk and Mixbus32C(4.3).
i7-13700|Gig-UD790-RD|UAD2octo+solo|Multiple-drives|MatroxC420|W11
Audient-iD44II+ASP800|Aphex141B|KRK-VXT6|+VariousOutboardGear|+guitars&basses|+MIDI-keyboards
User avatar
HCMarkus
Posts: 9712
Joined: Tue Jan 10, 2006 9:01 am
Primary DAW OS: MacOS
Location: Rancho Bohemia, California
Contact:

Re: Hardware outputs not detected?

Post by HCMarkus »

Did you look at the Bundles window in DP? I am familiar only with MOTU interfaces in Mac OS, which publish all i/o to that window, but I suspect your Audient may, too, if the proper driver software is installed.
User avatar
Kev
Posts: 21
Joined: Thu Dec 07, 2017 7:13 pm
Primary DAW OS: Windows
Location: Victoria, Australia

Re: Hardware outputs not detected?

Post by Kev »

I haven't checked out Bundles yet. I'm still trying to wrap my head around the basic stuff. But if learning about Bundles will help, I'll look into that next. Thanks.
Occasional user of DP(v9.52), Mainly using Cakewalk and Mixbus32C(4.3).
i7-13700|Gig-UD790-RD|UAD2octo+solo|Multiple-drives|MatroxC420|W11
Audient-iD44II+ASP800|Aphex141B|KRK-VXT6|+VariousOutboardGear|+guitars&basses|+MIDI-keyboards
User avatar
Kev
Posts: 21
Joined: Thu Dec 07, 2017 7:13 pm
Primary DAW OS: Windows
Location: Victoria, Australia

Re: Hardware outputs not detected?

Post by Kev »

The only hardware option in any track or bus output is "Analogue 1-2 (Stereo)".
Occasional user of DP(v9.52), Mainly using Cakewalk and Mixbus32C(4.3).
i7-13700|Gig-UD790-RD|UAD2octo+solo|Multiple-drives|MatroxC420|W11
Audient-iD44II+ASP800|Aphex141B|KRK-VXT6|+VariousOutboardGear|+guitars&basses|+MIDI-keyboards
User avatar
HCMarkus
Posts: 9712
Joined: Tue Jan 10, 2006 9:01 am
Primary DAW OS: MacOS
Location: Rancho Bohemia, California
Contact:

Re: Hardware outputs not detected?

Post by HCMarkus »

Kev wrote:The only hardware option in any track or bus output is "Analogue 1-2 (Stereo)".
Did you look into Bundles yet? The Bundles window is where one creates the i/o matrix for DP. Take a look if you haven't already done so.
User avatar
Kev
Posts: 21
Joined: Thu Dec 07, 2017 7:13 pm
Primary DAW OS: Windows
Location: Victoria, Australia

Re: Hardware outputs not detected?

Post by Kev »

OK I've got it now. Thanks.

Do I need to set this up for each project? I was expecting the i/o settings to be global.
Occasional user of DP(v9.52), Mainly using Cakewalk and Mixbus32C(4.3).
i7-13700|Gig-UD790-RD|UAD2octo+solo|Multiple-drives|MatroxC420|W11
Audient-iD44II+ASP800|Aphex141B|KRK-VXT6|+VariousOutboardGear|+guitars&basses|+MIDI-keyboards
Post Reply