No sound unless POD HD500 is on and plugged into S/DIF
Moderator: James Steele
Forum rules
This forum is for most discussion related to the use and optimization of Digital Performer [Windows] and plug-ins as well as tips and techniques. It is NOT for troubleshooting technical issues, complaints, feature requests, or "Comparative DAW 101."
This forum is for most discussion related to the use and optimization of Digital Performer [Windows] and plug-ins as well as tips and techniques. It is NOT for troubleshooting technical issues, complaints, feature requests, or "Comparative DAW 101."
No sound unless POD HD500 is on and plugged into S/DIF
I have an Audio Express connected to a machine running Windows 8.1. I have a Pod HD500 guitar processor plugged into the S/PDIF input. I just discovered I get no sound from the Audio Express unless my Pod HD500 guitar processor is on and plugged into the S/PDIF input. If I turn off the Pod, no sound. If I unplug the cable from the S/PDIF jack, no sound. This seems strange to me. What can I do to get around this? I'd rather not have to have the Pod on whenever I just want to listen to music. Thanks.
- HCMarkus
- Posts: 9755
- Joined: Tue Jan 10, 2006 9:01 am
- Primary DAW OS: MacOS
- Location: Rancho Bohemia, California
- Contact:
Re: No sound unless POD HD500 is on and plugged into S/DIF
Sounds like your interface is slaved to the digital input. Check your interface clock settings.
Re: No sound unless POD HD500 is on and plugged into S/DIF
That was it. The master clock source was set to S/PDIF. Thanks.