It is currently Sun Jul 23, 2017 3:45 am
   
Text Size

Speaker mounting from wall/ceiling?

Here's where to talk about preamps, cables, microphones, monitors, etc.

Moderator: James Steele

Forum rules
Here's where to talk about preamps, cables, microphones, monitors, etc.

Re: Speaker mounting from wall/ceiling?

Postby waxman » Sat Apr 15, 2017 7:51 pm

I had JBL 4425s back in the day. I loved them. Dave Polich really loved them. They were really heavy and really loud...

You can get plenty of support by anchoring to the wall. Find the studs in the wall with a stud finder. Cut a large enough piece ply wood to span 2 studs. You can make the plywood look nice by staining the same as the JBL cabs or paint the same as wall and it will blend in. You can then buy large Corbels for a shelf or make your own that angles down.. Attach to the anchored plywood on the wall. Or buy one of many various swing arm monitor or tv support devices. You can fashion a shelf that will attach to a swing arm. Just remember the whole thing is only a strong as the connectors. Even if you get a heavy duty swing arm it still needs strong connector. So use lots of long wood screws into the wall studs to anchor plywood. Adding a couple molly's would not hurt. Use a lip on the shelf for security. I would suggest a small wire attached to the speaker in case of quake... a little would putty would repair it so you never see it. Ok that is the DIY wall way of doing it...

If I was doing it I would do a plywood anchor to the ceiling and install omni mounts to the speakers. Just remove the woofer and drill holes and bolt through the JBL cabinet. Here is a link to the omni mounts and some pics of what it looks like. It's the best way imo....

https://www.google.com/search?q=heavy+duty+omni+mounts&espv=2&source=lnms&tbm=isch&sa=X&ved=0ahUKEwimoKza-qfTAhXjslQKHYcRDlAQ_AUIBygC&biw=961&bih=486#tbm=isch&q=heavy+duty+electrovoice+speaker+omni+mounts&imgrc=Ef0iwYd3-aZM7M:

Looks like this....
Image
waxman
DP9.12, Intel 3.5 6 core MacPro, Sierra OS 10.12.3, Slate VMS, Everything Bundle, Raven MTI 2, UAD Apollo 16, Apollo Twin Duo, UAD Satellite Octo Tbolt, 24ch of Focusrite ISA 828 pres, Neve 8816 summing mixer, NI Komplete 10 Ultimate & Arturia V Collection 4, Maschine Studio Hardware, Kontrol 61s, Kronos X88, Spectrasonics Ominisphere, BFD3, Roland TD-30 KV eDrums, Ozone 7, Altiverb, Adam A77X, Auratones, Blue Mics including Bottle, Blueberry & Dragonfly, Final Cut X. PT 11.
User avatar
waxman
 
Posts: 1814
Joined: Sat Oct 16, 2004 10:01 pm
Location: Encinitas CA
Primary DAW OS: MacOS

Re: Speaker mounting from wall/ceiling?

Postby James Steele » Sat Apr 15, 2017 11:36 pm

Cool! Thanks for the info. I was hoping to avoid drilling through the wood (walnut?) cabinets of the 4410s, but it might be unavoidable. And yep... I love the 4410s although probably not the best to mix on as they do tend to make everything sound good. A lot of fun for tracking though! :)
JamesSteele.com | Dean Guitars | Facebook | Google+ | Twitter

MacPro5,1 Hexcore 3.33, 24GB RAM, macOS 10.12.2, ATI 5770, DP 9.12, MOTU HD192, 24I/O, UAD-2 Duo, Lucid GENx192, HV-3C, Red Type B, Dean guitars, Marshall amps, etc., etc.!
User avatar
James Steele
Site Administrator
 
Posts: 16696
Joined: Fri Oct 15, 2004 10:01 pm
Location: San Diego, CA - U.S.A.
Primary DAW OS: MacOS

Re: Speaker mounting from wall/ceiling?

Postby daniel.sneed » Mon Apr 17, 2017 12:13 am

K&M wall mounts are that good
https://produkte.k-m.de/en/Speakerlight ... ount-black

Some (modern) JBL speakers have threaded inserts pre-instaled, that just fit to K&M.

+1 with Waxman about large thick plywood panels, set on wall (or ceiling) to attach to.
dAn
Shake it all over!
___
DP9.13, OS10.12.6, MacBookPro-i7-3.1Ghz-1ToSSD-16GoRam
Pianoteq, Falcon, Alchemy, Iris, BreakTweaker, Kontakt, Absynth, Reason, GPO, Miroslav
Novation 49SLmkII, Studiologic VMK161+, ControlPad, EWIusb
Blofeld, UltraNova & MiniNova,
Lexicon, Ozone, RX, Alloy, Trash, SpectraFoo, IrcamTS
JBL4326+4312sub, Behringer X-32 rack
Many mics (Tuby or not tuby? That is the question)
Many guitars, banjos, mandolins, flutes, xylos, kalimbas...
http://myspace.com/adokmusic
User avatar
daniel.sneed
 
Posts: 2060
Joined: Sun Jan 23, 2005 11:01 pm
Location: France
Primary DAW OS: MacOS

Previous

Return to General Recording

Who is online

Users browsing this forum: No registered users and 1 guest


Who is online

In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
Most users ever online was 151 on Tue Jan 28, 2014 1:07 pm

Users browsing this forum: No registered users and 1 guest

Login Form