TASCAM US 2400 CONTROLLER
Moderator: James Steele
Forum rules
This forum is for most discussion related to the use and optimization of Digital Performer [MacOS] and plug-ins as well as tips and techniques. It is NOT for troubleshooting technical issues, complaints, feature requests, or "Comparative DAW 101."
This forum is for most discussion related to the use and optimization of Digital Performer [MacOS] and plug-ins as well as tips and techniques. It is NOT for troubleshooting technical issues, complaints, feature requests, or "Comparative DAW 101."
- Bennie Sims
- Posts: 211
- Joined: Sun May 15, 2005 10:01 pm
- Primary DAW OS: MacOS
- Location: USA
- Contact:
TASCAM US 2400 CONTROLLER
Is there anyway too make DP 8 or any version of DP to be controlled by the Jog wheel on this controller? I know initially it wasn't possible when I bought the US 2400 but was wondering if there where any person(s) who have found a way to make this happen since then.
Mac Pro Six Core Trashcan OX.10.13.3,Macbook Pro 2.53 GHz Intel Core i5 OSX 10.11,DP 8.07 and 9.52,Protools 2018.4 and 10.3.9,Logic 10.4.1.,Reason 8,Waves V9.7. Diamond Bundle, Mach Five 3.2.1, Vir 2, Kontakt 5.3, Melodyne Studio 3.2.2.2, Melodyne Single Track, Motu 2804 MK3, Apollo 8 Quad,Apollo 8 Duo,UAD 2 FireWire Quad Satellite, UAD Thunderbolt Quad Satellite, Rosetta 800, Avalon Vt 747sp, Focusrite 4x Red One, UAD 4-710d, Raven MTi 2 3.3.1, Motu MIDI Express XT.
- Gravity Jim
- Posts: 2005
- Joined: Wed Apr 30, 2008 2:55 am
- Primary DAW OS: MacOS
- Location: Santa Rosa, CA
Re: TASCAM US 2400 CONTROLLER
The jog wheel on my Tascam DM3200 works with DP in the Control Surface layer, so I know it's possible there. Does the US2400 software allow for two Mackie units... a main and an expander... going out two MIDI channels? I'm pretty sure that is required on the DM. (Not in front of the gear... I'll have to wait to be more specific.)
Do you have the most recent driver installed?
Do you have the most recent driver installed?
Jim Bordner
MacPro 5,1 (3.33Ghz 12-core), 32g RAM, OS X 10.14.6 • MOTU DP 10.11 • Logic Pro X 10.2.5 • Waves Platinum, UAD-2, Slate Digital, Komplete, Omnisphere 2, LASS, CineSamples, Chipsounds, V Collection 5[color]
MacPro 5,1 (3.33Ghz 12-core), 32g RAM, OS X 10.14.6 • MOTU DP 10.11 • Logic Pro X 10.2.5 • Waves Platinum, UAD-2, Slate Digital, Komplete, Omnisphere 2, LASS, CineSamples, Chipsounds, V Collection 5[color]
- Bennie Sims
- Posts: 211
- Joined: Sun May 15, 2005 10:01 pm
- Primary DAW OS: MacOS
- Location: USA
- Contact:
Re: TASCAM US 2400 CONTROLLER
Yes. Tascam stopped supporting it years ago though. I was hoping that someone may have found a way to implement the jog wheel. I use a Mackie Control and 3 expanders to set it up in DP. I wonder if there is a way to somehow rig the DM3200 drivers with the 2400 drivers. sounds far fetched....I know. Thanks for replying!!Gravity Jim wrote:The jog wheel on my Tascam DM3200 works with DP in the Control Surface layer, so I know it's possible there. Does the US2400 software allow for two Mackie units... a main and an expander... going out two MIDI channels? I'm pretty sure that is required on the DM. (Not in front of the gear... I'll have to wait to be more specific.)
Do you have the most recent driver installed?
Mac Pro Six Core Trashcan OX.10.13.3,Macbook Pro 2.53 GHz Intel Core i5 OSX 10.11,DP 8.07 and 9.52,Protools 2018.4 and 10.3.9,Logic 10.4.1.,Reason 8,Waves V9.7. Diamond Bundle, Mach Five 3.2.1, Vir 2, Kontakt 5.3, Melodyne Studio 3.2.2.2, Melodyne Single Track, Motu 2804 MK3, Apollo 8 Quad,Apollo 8 Duo,UAD 2 FireWire Quad Satellite, UAD Thunderbolt Quad Satellite, Rosetta 800, Avalon Vt 747sp, Focusrite 4x Red One, UAD 4-710d, Raven MTi 2 3.3.1, Motu MIDI Express XT.