Hi, I am trying now for hours to get Cuemix to work with OSC.
I tried TouchOSC and OSCulator, both recognize Cuemix and receive events from Cuemix, however I am unable to send a command to Cuemix, it just dont react. Especially I am trying to send a "mute" signal to the mic input ("/mix/mute/1/1").
In Cuemix the OSC device (both the ipad or the OSCulator) is found and selected. "Enable Control Surfaces" and "Follow control surfaces" is checked too. I tried the same thing on another computer with a fresh installed Cuemix, and its the same problem.
Any help is appreciated!
Cuemix not responding to OSC commands
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
- terrybritton
- Posts: 1117
- Joined: Thu Jun 04, 2015 8:45 am
- Primary DAW OS: Windows
- Location: Elizabeth City, NC
- Contact:
Re: Cuemix not responding to OSC commands
I take it you are trying to use MOTU's own layout:
http://motu.com/download/download_match ... oad_id=221
I've had this working before, and I'll try it again to see if I can replicate your problem.
Terry
http://motu.com/download/download_match ... oad_id=221
I've had this working before, and I'll try it again to see if I can replicate your problem.
Terry
Computer: Sweetwater CS400v7 Intel Core i7-10700K CPU @ 3.80GHz | 64Gigs RAM | Windows 11 Pro x64 |
MOTU 828 mk3 hybrid
DAWs & Live: MOTU Digital Performer 11.31 | Cantabile Performer 4
Keyboard Synths: Kawai K5000s, Korg Wavestation
Controllers: NI Komplete Kontrol S-88 Mk3 & S-49 Mk2; Maschine Mk3 & JAM;
Akai MPK249 & 225, Alesis QX49, Behringer BCF2000 & FCB1010
Rack Modules: Ensoniq ESQm, Yamaha TX81Z, Wavestation SR
Tutorials: https://youtube.com/@CreatorsMediaTools
MOTU 828 mk3 hybrid
DAWs & Live: MOTU Digital Performer 11.31 | Cantabile Performer 4
Keyboard Synths: Kawai K5000s, Korg Wavestation
Controllers: NI Komplete Kontrol S-88 Mk3 & S-49 Mk2; Maschine Mk3 & JAM;
Akai MPK249 & 225, Alesis QX49, Behringer BCF2000 & FCB1010
Rack Modules: Ensoniq ESQm, Yamaha TX81Z, Wavestation SR
Tutorials: https://youtube.com/@CreatorsMediaTools
Re: Cuemix not responding to OSC commands
Thanks for your reply.
Well, I tried, but I was unable to get it synced over Wifi from Cuemix to TouchOSC. It just did not show up in TouchOSC, even clicking multiple times on "Sync" in the OSC settings in Cuemix. The way with transferring it through iTunes does not work anymore as the latest iTunes does not allow to sync Apps anymore.
Well, I tried, but I was unable to get it synced over Wifi from Cuemix to TouchOSC. It just did not show up in TouchOSC, even clicking multiple times on "Sync" in the OSC settings in Cuemix. The way with transferring it through iTunes does not work anymore as the latest iTunes does not allow to sync Apps anymore.
- terrybritton
- Posts: 1117
- Joined: Thu Jun 04, 2015 8:45 am
- Primary DAW OS: Windows
- Location: Elizabeth City, NC
- Contact:
Re: Cuemix not responding to OSC commands
You didn't mention this, but did you use the TouchOSC Editor to send the layouts to your mobile device? (At the bottom of this page - you need Java to run it.)frank777 wrote:Thanks for your reply.
Well, I tried, but I was unable to get it synced over Wifi from Cuemix to TouchOSC. It just did not show up in TouchOSC, even clicking multiple times on "Sync" in the OSC settings in Cuemix. The way with transferring it through iTunes does not work anymore as the latest iTunes does not allow to sync Apps anymore.
Terry
Computer: Sweetwater CS400v7 Intel Core i7-10700K CPU @ 3.80GHz | 64Gigs RAM | Windows 11 Pro x64 |
MOTU 828 mk3 hybrid
DAWs & Live: MOTU Digital Performer 11.31 | Cantabile Performer 4
Keyboard Synths: Kawai K5000s, Korg Wavestation
Controllers: NI Komplete Kontrol S-88 Mk3 & S-49 Mk2; Maschine Mk3 & JAM;
Akai MPK249 & 225, Alesis QX49, Behringer BCF2000 & FCB1010
Rack Modules: Ensoniq ESQm, Yamaha TX81Z, Wavestation SR
Tutorials: https://youtube.com/@CreatorsMediaTools
MOTU 828 mk3 hybrid
DAWs & Live: MOTU Digital Performer 11.31 | Cantabile Performer 4
Keyboard Synths: Kawai K5000s, Korg Wavestation
Controllers: NI Komplete Kontrol S-88 Mk3 & S-49 Mk2; Maschine Mk3 & JAM;
Akai MPK249 & 225, Alesis QX49, Behringer BCF2000 & FCB1010
Rack Modules: Ensoniq ESQm, Yamaha TX81Z, Wavestation SR
Tutorials: https://youtube.com/@CreatorsMediaTools