Hi,
I want to set the main outputs of the Ultralite AVB to a level of about -20dBu.
In the tech specs of the Ultralite AVB it is mentioned that the analog outputs have a max level of +20dBu with a trim range of -4 to 20dB. If I go to Device -> Output Settings in the software mixer I can set the trim of the phones (-127 to 0), main out(-127 to 0) and analog outputs (-24 to 0).
I would now assume that a trim setting of 0dB results in the maximum output level of 20dBu. Setting the trim to -40dB on the mains should then result in a output of -20dBu, is this correct?
output level trim Ultralite AVB
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX