I am upgrading the OS in my Studio Electronics synth.
The instruction says:
Set your MIDI interface to 1MHz (this has nothing to do with “tempo,” which is preset), or whatever your slowest transmission speed is; if you do not you will damage your Flash-ROM chip irreparably.
So how I can set the MIDI transmission speed to 1MHz on MOTU 828x?
(I can't find the info in the manual)
How to set the MIDI transmission speed to 1MHz? (MOTU 828x)
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Re: How to set the MIDI transmission speed to 1MHz? (MOTU 82
1 MHz is the standard rate in the MIDI spec. I didn't know it was common to run MIDI at any other rate. I've had a load of MIDI stuff over the years, and none of it had a means of changing this.
2018 Mini i7 32G 10.14.6, DP 11.3, Mixbus 9, Logic 10.5, Scarlett 18i8
Re: How to set the MIDI transmission speed to 1MHz? (MOTU 82
it used to be in DP long ago- not sure if it still does? on hardware it was part of GM protocol - or was it? It might have been in AM - audio/MIDI setup.
Mac Studio MAX 2TB/ 64GB RAM / DP11.2 / 828ES//
MP 5.1 3.33- 3 duo / OS10.14.6 / RX580 /DP10.13/828ES
MP 5.1 3.33- 3 duo / OS10.14.6 / RX580 /DP10.13/828ES