mirror main out signal to another output pair -828iii hybrid

Moderator: James Steele

Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Post Reply
sjdems
Posts: 4
Joined: Wed Nov 02, 2011 12:07 am
Primary DAW OS: Unspecified

mirror main out signal to another output pair -828iii hybrid

Post by sjdems »

Hi all.
I am trying to simultaneously listen to audio material via osx (internet/itunes etc) and route the same audio to another pair of outs.

All audio from osx is being successfully routed to the main XLR outs (monitors).
Due to audio from osx not having a dedicated channel in cuemix I can not work out how to mirror the audio (main outs) to say outputs 3/4.

I am trying to :
1-monitor the audio.
2-send audio to a hardware sampler :banghead:

Regards,
Steve
User avatar
mikehalloran
Posts: 15133
Joined: Sun Jan 25, 2009 5:08 pm
Primary DAW OS: MacOS
Location: Sillie Con Valley

Re: mirror main out signal to another output pair -828iii hy

Post by mikehalloran »

DP 11.31; 828mkII FW, micro lite, M4, MTP/AV USB Firmware 2.0.1
2023 Mac Studio M2 8TB, 192GB RAM, OS Sonoma 14.4, USB4 8TB external, M-Audio AIR 192|14, Mackie ProFxv3 6/10/12; 2012 MBPs Catalina, Mojave
IK-NI-Izotope-PSP-Garritan-Antares, LogicPro X, Finale 27.4, Dorico 5.2, Notion 6, Overture 5, TwistedWave, DSP-Q 5, SmartScore64 Pro, Toast 20 Pro
sjdems
Posts: 4
Joined: Wed Nov 02, 2011 12:07 am
Primary DAW OS: Unspecified

Re: mirror main out signal to another output pair -828iii hy

Post by sjdems »

Many thanks :mrgreen:
The adat/toslink i/o routing did the trick!
Mirroring the main outputs to a chosen pair still gave me phasing issues in my DAW...
Much respect
Post Reply