Hi all,
The proprietary audio software I use has no matrix capability and I'm trying to get a return from 8 analog out to main mix. There seems to be no "dry" send/return path in Cuemix to do this (such path is only possible via the reverb).
The only solution I found is to physically connect each analog (1-8) outs to an "y" to get outputs *and* analog ins (1-8) and use the Mixes to route each analog inputs to the main. Sure, there is a risk of feedback if the Mixes are misconfigured (say, for example: Analog in 1 routed to Analog out 1).
Any better idea? Sure I could add an external mixer for this task, but i prefer to avoid it.
Thanks for your help (btw, sorry if I miss something obvious, but I read the manual many times...).
get return on Ultralite Hybrid MK3 analog outs to main out.
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
get return on Ultralite Hybrid MK3 analog outs to main out.
Ultralite MK3 Hybrid, Macbook Air i7 1,8 GHz, Yosemite, Qlab V.2
Sony Vegas/Sound forge (on Bootcamp).
Sony Vegas/Sound forge (on Bootcamp).