So I just received my 1248 today. I had work so I only had a short amount of time to play around with it but I couldn't get the inputs figured out completely.
My question is, can I use the mics pres, guitar inputs, and line in 1-8 all at the same time? When I open pro tools and select an Input for a track, it only shows IP 1-8, spdif 1-2, adat 1-16, and loop 1-2.
I plugged in a mic and mic inputs 1-4 = IP 1-4 in pro tools. Guitar inputs 1-2 = IP 5-6 in pro tools. I didn't check the line ins but I can only assume line ins 1-2 = IP 7-8 in pro tools.
So where are my line in 3-8 going? Where are there inputs in pro tools?
I hope I've worded this specifically enogh so I can get the proper advice.
Thanks in advance for any help!
1248 input help!
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Re: 1248 input help!
Come on, no one?
- MIDI Life Crisis
- Posts: 26254
- Joined: Wed May 18, 2005 10:01 pm
- Primary DAW OS: MacOS
- Contact:
Re: 1248 input help!
How about tech support at MOTU?
- mikehalloran
- Posts: 15221
- Joined: Sun Jan 25, 2009 5:08 pm
- Primary DAW OS: MacOS
- Location: Sillie Con Valley
Re: 1248 input help!
Have you read the manual?
DP 11.31; 828mkII FW, micro lite, M4, MTP/AV USB Firmware 2.0.1
2023 Mac Studio M2 8TB, 192GB RAM, OS Sonoma 14.4.1, USB4 8TB external, M-Audio AIR 192|14, Mackie ProFxv3 6/10/12; 2012 MBPs Catalina, Mojave
IK-NI-Izotope-PSP-Garritan-Antares, LogicPro X, Finale 27.4, Dorico 5.2, Notion 6, Overture 5, TwistedWave, DSP-Q 5, SmartScore64 Pro, Toast 20 Pro
2023 Mac Studio M2 8TB, 192GB RAM, OS Sonoma 14.4.1, USB4 8TB external, M-Audio AIR 192|14, Mackie ProFxv3 6/10/12; 2012 MBPs Catalina, Mojave
IK-NI-Izotope-PSP-Garritan-Antares, LogicPro X, Finale 27.4, Dorico 5.2, Notion 6, Overture 5, TwistedWave, DSP-Q 5, SmartScore64 Pro, Toast 20 Pro
- MIDI Life Crisis
- Posts: 26254
- Joined: Wed May 18, 2005 10:01 pm
- Primary DAW OS: MacOS
- Contact:
Re: 1248 input help!
There's a manual!?
Re: 1248 input help!
How about tech support? Yes true.
But how about the forum made specially for Motu?..
And yes I've read the "manual". It's a glorified spec sheet. Not helpful in the slightest.
But I figured out the problem. My I/O settings in pro tools were still set for my previous interface.
I changed the I/O and everything's good now.
User error.
But how about the forum made specially for Motu?..
And yes I've read the "manual". It's a glorified spec sheet. Not helpful in the slightest.
But I figured out the problem. My I/O settings in pro tools were still set for my previous interface.
I changed the I/O and everything's good now.
User error.