Hello,
I've recently purchased a Motu Track 16 and i'm having problems with the return assign function.
I would like to feed back the audio signal on output 1-2 (default) to a stereo track in my DAW (Logic X). Or in other words i would like to record, inside of logic, whatever audio i currently play on my computer.
What i did is:
1. I've set the Return Assign in the Motu Audio Setup to: Main Out 1-2
2. Set the I/O output of Logic to 3-4
3. Created an Audio / Stereo Track with Input 1-2 and hit record.
But nothing happens. i.e. there's no signal on my Stereo Track.
Any help would be appreciated.
Moto Track 16 - Return Assign
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Re: Moto Track 16 - Return Assign
Just found out how it works.
Return Assign must be set to Analog 1-2
Audio Input to 9-10
Output of your DAW to 3-4 or 5-6
Return Assign must be set to Analog 1-2
Audio Input to 9-10
Output of your DAW to 3-4 or 5-6
- MIDI Life Crisis
- Posts: 26254
- Joined: Wed May 18, 2005 10:01 pm
- Primary DAW OS: MacOS
- Contact:
Re: Moto Track 16 - Return Assign
Thank you for posting the solution! That's very helpful. LOVE my Track 16!