MOTU Traveller doesn't work with mac OSX 10.9.4
I formatted (again), now the computer is completely clean, and the traveller still does not work!
I have reset the Motu Traveller too. (Factory default)
FIRMWARE 1.07
I tried with - MOTU Universal Audio Installer for Mac OS X (1.6.59644) - and many other.
Obviously I set in a correct way the system preferences, and the audioMidi Setup.
I checked everything from cables until drivers.
I called the Italian retailer in Milan, they have tried to help me, but nothing, and they were remotely connected to my computer.
Am I the only one???????
MOTU Traveller doesn't work with mac OSX 10.9.4
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. for Mac OSX
Re: MOTU Traveller doesn't work with mac OSX 10.9.4
Works on my setup with driver 1.6 6025.
828x MacOS 13.6.6 M1 Studio Max 1TB 64G DP11.31
Re: MOTU Traveller doesn't work with mac OSX 10.9.4
My setup:
mac mini 2,3 GHz Intel Core i7
Software OS X 10.9.4
Firmware on Traveler 1.07
I tried with - MOTU Universal Audio Installer for Mac OS X (1.6.60625) too.
and many others . //older... because before it works.
I really don't know what I can do now.
There are a lot of click or sine wave like sounds when I open programs or just press play an audio file.
maybe it happened to someone else.
I remember that happened to me when I hadn't the last firmware.
Do you guys have any suggestions?
thx
mac mini 2,3 GHz Intel Core i7
Software OS X 10.9.4
Firmware on Traveler 1.07
I tried with - MOTU Universal Audio Installer for Mac OS X (1.6.60625) too.
and many others . //older... because before it works.
I really don't know what I can do now.
There are a lot of click or sine wave like sounds when I open programs or just press play an audio file.
maybe it happened to someone else.
I remember that happened to me when I hadn't the last firmware.
Do you guys have any suggestions?
thx
- bralston
- Posts: 585
- Joined: Fri Oct 15, 2004 10:01 pm
- Primary DAW OS: MacOS
- Location: Los Angeles, CA
- Contact:
Re: MOTU Traveller doesn't work with mac OSX 10.9.4
For what it is worth...this past weekend I did some recording on my brand new MacbookPro Core i7 with Mavericks 10.9.4 using the original MOTU Traveler with the latest firmware as the interface. Running the latest MOTU audio drivers and everything...and recording through it into DP8 worked just fine bus powered with the Thunderbolt dongle and a firewire 800->400 cable.
Regards,
Brian Ralston
___________________________________
- MacPro 7,1 3.2 GHz 16-core Intel Xeon W, 384GB 2933MHz DDR4 RAM, OS 10.15.7, 2TB SSD OS drive, 6TB Samsung Pro EVOPlus SSDs via Sonnet 4x4 M.2 PCIe card, Graphics card: AMD Radeon Pro Vega II 32GB, UAD-2 Quad, DP 10.13, DP 11.0,
- 15" MacBook Pro 2.3GHz 8‑core 9th‑generation Intel Core i9 processor, Turbo Boost to 4.8GHz, 32GB 2400MHz DDR4 mem, Radeon Pro Vega 20 w/4GB HBM2 mem, 2TB SSD storage, OS 10.15.7, 2TB SSD, DP 10.13
Brian Ralston
___________________________________
- MacPro 7,1 3.2 GHz 16-core Intel Xeon W, 384GB 2933MHz DDR4 RAM, OS 10.15.7, 2TB SSD OS drive, 6TB Samsung Pro EVOPlus SSDs via Sonnet 4x4 M.2 PCIe card, Graphics card: AMD Radeon Pro Vega II 32GB, UAD-2 Quad, DP 10.13, DP 11.0,
- 15" MacBook Pro 2.3GHz 8‑core 9th‑generation Intel Core i9 processor, Turbo Boost to 4.8GHz, 32GB 2400MHz DDR4 mem, Radeon Pro Vega 20 w/4GB HBM2 mem, 2TB SSD storage, OS 10.15.7, 2TB SSD, DP 10.13