No trim levels for analog inputs in cuemix
Posted: Tue Apr 03, 2012 5:18 pm
Hello everybody!!!
I own a 896 mk3 and use the cuemix fx (in Mac OSX) for the headphones mixes.The problem is that there is no trim level for the analog inputs in cuemix so i can calibrate the incoming levels.I also use an AVALON Vt 737 sp and a Joemeek twinq as preamps.
I did a test using a white noise generator from Logic Pro, passing the signal through the Joemeek.The 896 mk3 output (connected to Joemeek) was sending the signal in the level of -1 db.In order to take the same level at the return input ,the Joemeek VU meter show about -10 db.If i use the -20 db pad of 896 mk3,the signal i get is weak and the preamps are to set to their limits as a result i get destorted or noisy signal because of the gain.
I downloaded the latest version of MOTU Universal Audio Installer for Mac OS X (1.6.50450),but still the same,NO TRIM LEVELS.Is there something wrong with my installation or an other download of the cuemix fx so i could solve this issue?
Thanks for the intresting!!!
I own a 896 mk3 and use the cuemix fx (in Mac OSX) for the headphones mixes.The problem is that there is no trim level for the analog inputs in cuemix so i can calibrate the incoming levels.I also use an AVALON Vt 737 sp and a Joemeek twinq as preamps.
I did a test using a white noise generator from Logic Pro, passing the signal through the Joemeek.The 896 mk3 output (connected to Joemeek) was sending the signal in the level of -1 db.In order to take the same level at the return input ,the Joemeek VU meter show about -10 db.If i use the -20 db pad of 896 mk3,the signal i get is weak and the preamps are to set to their limits as a result i get destorted or noisy signal because of the gain.
I downloaded the latest version of MOTU Universal Audio Installer for Mac OS X (1.6.50450),but still the same,NO TRIM LEVELS.Is there something wrong with my installation or an other download of the cuemix fx so i could solve this issue?
Thanks for the intresting!!!