I have a (new to me) 828x connected via USB to a Windows 7 x64 machine. I had to reinstall the drivers a couple of times but I think they are good now. 2nd time I had the device unplugged. I've set the sample rate to 48k using the control panel.
When I try and play audio from anything the app just hangs. No audio comes out any of the channels. e.g. a web browser, media player, rèaper using ASIO.
The playback devices setting for output in windows is "MOTU Analog 1-2" which I've plugging into my mixer. Can't get anything out of that or the "phones" output. Tried all the other ones.
I've done a factory reset on the device.
So I'm not sure what to try next... ideas?
(I did read the tech support FAQ. Nothing seemed particularly relevant).
Problems with 828x on windows
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Re: Problems with 828x on windows
FYI I just tried it with my Macbook and Logic and it's working ok there. Probably not the hardware... but a windows issue.
Re: Problems with 828x on windows
After plugging it back into windows I have sound. Hmmm. Well till next time.
Well I love how whisper quiet the audio is with no input. My old FA-101 would telegraph all the pops and clicks going on in the computer. But it died last week after 15 something years.
Well I love how whisper quiet the audio is with no input. My old FA-101 would telegraph all the pops and clicks going on in the computer. But it died last week after 15 something years.
Re: Problems with 828x on windows
I think for others that run into issues, here is what the procedure should be:
Code: Select all
Unplug interface if it's plugged in
Download and install the audio drivers (reboot if needed)
do
{
unplug if needed..
re-plug interface...
}
while (driver install popup appears); // 3 times? More or less?
Test interface...