Motu 828 mk3 reverb on mono channel

Moderator: James Steele

Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Post Reply
steeneren
Posts: 1
Joined: Sat Jul 01, 2017 2:23 pm
Primary DAW OS: Windows

Motu 828 mk3 reverb on mono channel

Post by steeneren »

Hey There..
I'll try to explain myself as good as possible, hope it makes sense..


Just bought me one of these, and I'm going to use it for live performance.

Output 1-2 is the backtrack from my DAW to FOH
Output 3-4 is the MusicTrack from DAW to the drummers ears
Output 5 is the click track from DAW to the drummers ears
Output 6 is routed from Mic input 1 and is for the vocalist
output 7 is routed from Mic input 2 and is for the 2nd vocalist.

So the plan was to use the built in reverb on mic input 1 and 2.
But in Cuemix fx I cannot choose to listen only on output channel 6. I can only choose to listen to channel 5-6. that means that the reverb can be heard on channel 5 as well..
is there any way to work around this?

Steen // Denmark
Post Reply