MOTU 2408 meters show input but no daw input or soun

Moderator: James Steele

Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Post Reply
chrismilne
Posts: 6
Joined: Mon May 01, 2017 8:34 am
Primary DAW OS: Windows

MOTU 2408 meters show input but no daw input or soun

Post by chrismilne »

I just setup an older computer with my original PCI324 and MOTU 2408 (which i had working a few days on another old computer that was too slow). I see input on the front meters from the output of my Kemper but there is no input in my daw and i don't hear anything on the master outputs or the headphones output. I have tried in cubase and a demo of reaper. Any ideas?

I'm 90% sure i set it up exactly like I did on my other pc the other day so i'm at a loss.
chrismilne
Posts: 6
Joined: Mon May 01, 2017 8:34 am
Primary DAW OS: Windows

Re: MOTU 2408 meters show input but no daw input or soun

Post by chrismilne »

Never mind, old man that can't read and assumed the inputs 1/2 were the one ones closest to the power cable but they are numbered the other direction
User avatar
mikehalloran
Posts: 15132
Joined: Sun Jan 25, 2009 5:08 pm
Primary DAW OS: MacOS
Location: Sillie Con Valley

Re: MOTU 2408 meters show input but no daw input or soun

Post by mikehalloran »

I still own a 2408 and 324 card. Glad to see someone's still getting use from it.
DP 11.31; 828mkII FW, micro lite, M4, MTP/AV USB Firmware 2.0.1
2023 Mac Studio M2 8TB, 192GB RAM, OS Sonoma 14.4, USB4 8TB external, M-Audio AIR 192|14, Mackie ProFxv3 6/10/12; 2012 MBPs Catalina, Mojave
IK-NI-Izotope-PSP-Garritan-Antares, LogicPro X, Finale 27.4, Dorico 5.2, Notion 6, Overture 5, TwistedWave, DSP-Q 5, SmartScore64 Pro, Toast 20 Pro
Post Reply