Midit Timepiece as Stand Alone

[ultramar]

Hello everyone. Thank you for accepting this forum.
I have a question for you.
For many years use MIDI Timepiece AV (no USB, which came with RS242)with Cakewalk.
After a few years, I decided not to continue using the computer to sequence so make setup with hardware sequencer (Kawai Q80).
I have not the RS232 cable to routing MIDI data in PC mode.
Im try it in stand alone mode, by the LCD Screen.

In the IN1 connected to a Roland XP10 to make master controlling.
IN2 to the output of the sequencer.

And in the Outs I have:
Out1: Korg Poly 800 (in channel3)
Out2: Yamaha DX7 (in Channel2)
OUT3: Casio CZ1000 (in channel1)
OUT4: Korg M1 (in channel 9 to 11)
OUT5: Kawai Q80 IN

I want to IN1 and IN2 sends the signas to Out1, Out2, Out3, Out 4 and Out 5.

Try to routing by LCD screen (looks very simple) but it is totally impossible for me to make it work.
Can you help me?
Thank you!

[mikehalloran]

The MTP can be used as a standalone device but cannot be programmed in standalone mode.

You must program and store your settings to the MTP while hooked up to a Mac or PC. Those can now be accessed while in standalone mode. The manual is fairly clear but you must learn to use the same terminology that MOTU uses.