Cakewalk X3 drivers don't support current audio formation...

Moderator: James Steele

Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Post Reply
Vinny D
Posts: 4
Joined: Mon May 30, 2016 8:15 pm
Primary DAW OS: Windows

Cakewalk X3 drivers don't support current audio formation...

Post by Vinny D »

I have the Audio Express connected to a Windows 8.1 machine, and when I open Cakewalk X3, I get the error message "The following driver(s) either do not support the current audio format, or are in use by another application. Please choose whether you want to disable them or use them anyway." I have the format set to 94 kHz/24 bit, and no other application is in use. This was working. I've rebooted the machine, cycled the power on the Audio Express, and nothing. Don't know what else to do. Thanks.
Top
Vinny D
Posts: 4
Joined: Mon May 30, 2016 8:15 pm
Primary DAW OS: Windows

Re: Cakewalk X3 drivers don't support current audio formatio

Post by Vinny D »

Following the instructions on the Cakewalk site fixed the problem. http://www.cakewalk.com/Support/Knowled ... viceId=197
Top
Post Reply

Return to “MOTU Hardware & Windows”