Windows 10. Switch from line to mic
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Windows 10. Switch from line to mic
How do I switch from line input to mic input on channel 1/2 of a Motu Ultralite Mk3? Is this doable from the motu software?
Re: Windows 10. Switch from line to mic
Aren't these inputs "Mic/Instrument", rather than "Mic/Line"? Which it is depends on what you plug into it. Looks like inputs 3 to 8 are line level.
2018 Mini i7 32G 10.14.6, DP 11.3, Mixbus 9, Logic 10.5, Scarlett 18i8
- terrybritton
- Posts: 1117
- Joined: Thu Jun 04, 2015 8:45 am
- Primary DAW OS: Windows
- Location: Elizabeth City, NC
- Contact:
Re: Windows 10. Switch from line to mic
There is no "switch" other than to use 1/4" balanced or unbalanced plugs (NEVER XLR!) for the line inputs. Set the trims at zero and turn down the sliders to half or so (-12 db) and you'll be fine. I'm assuming you want to use those inputs with a synth or tape input or something?
Terry
Terry
Computer: Sweetwater CS400v7 Intel Core i7-10700K CPU @ 3.80GHz | 64Gigs RAM | Windows 11 Pro x64 |
MOTU 828 mk3 hybrid
DAWs & Live: MOTU Digital Performer 11.31 | Cantabile Performer 4
Keyboard Synths: Kawai K5000s, Korg Wavestation
Controllers: NI Komplete Kontrol S-88 Mk3 & S-49 Mk2; Maschine Mk3 & JAM;
Akai MPK249 & 225, Alesis QX49, Behringer BCF2000 & FCB1010
Rack Modules: Ensoniq ESQm, Yamaha TX81Z, Wavestation SR
Tutorials: https://youtube.com/@CreatorsMediaTools
MOTU 828 mk3 hybrid
DAWs & Live: MOTU Digital Performer 11.31 | Cantabile Performer 4
Keyboard Synths: Kawai K5000s, Korg Wavestation
Controllers: NI Komplete Kontrol S-88 Mk3 & S-49 Mk2; Maschine Mk3 & JAM;
Akai MPK249 & 225, Alesis QX49, Behringer BCF2000 & FCB1010
Rack Modules: Ensoniq ESQm, Yamaha TX81Z, Wavestation SR
Tutorials: https://youtube.com/@CreatorsMediaTools
Re: Windows 10. Switch from line to mic
I have a lapel mic with an 1/8" plug which I convert to 1/4" I can't seem to get enough gain.
- terrybritton
- Posts: 1117
- Joined: Thu Jun 04, 2015 8:45 am
- Primary DAW OS: Windows
- Location: Elizabeth City, NC
- Contact:
Re: Windows 10. Switch from line to mic
Could the battery be nearly dead? The adapter would not cause a loss in gain unless it was defective. For mic input you would need to push up the trim value in Cuemix. If that is not enough to compensate, then you might need to buy a transformer-style high-impedance to low-impedance adapter, which will make a stack of two adapters in your case (the 1/8" to 1/4" into the transformer 1/4" to XLR adapter).waz wrote:I have a lapel mic with an 1/8" plug which I convert to 1/4" I can't seem to get enough gain.
Terry
Computer: Sweetwater CS400v7 Intel Core i7-10700K CPU @ 3.80GHz | 64Gigs RAM | Windows 11 Pro x64 |
MOTU 828 mk3 hybrid
DAWs & Live: MOTU Digital Performer 11.31 | Cantabile Performer 4
Keyboard Synths: Kawai K5000s, Korg Wavestation
Controllers: NI Komplete Kontrol S-88 Mk3 & S-49 Mk2; Maschine Mk3 & JAM;
Akai MPK249 & 225, Alesis QX49, Behringer BCF2000 & FCB1010
Rack Modules: Ensoniq ESQm, Yamaha TX81Z, Wavestation SR
Tutorials: https://youtube.com/@CreatorsMediaTools
MOTU 828 mk3 hybrid
DAWs & Live: MOTU Digital Performer 11.31 | Cantabile Performer 4
Keyboard Synths: Kawai K5000s, Korg Wavestation
Controllers: NI Komplete Kontrol S-88 Mk3 & S-49 Mk2; Maschine Mk3 & JAM;
Akai MPK249 & 225, Alesis QX49, Behringer BCF2000 & FCB1010
Rack Modules: Ensoniq ESQm, Yamaha TX81Z, Wavestation SR
Tutorials: https://youtube.com/@CreatorsMediaTools
Re: Windows 10. Switch from line to mic
The mic is a straight up dynamic microphone with no pack. I was hoping to use the gain controls from the MOTU to eliminate the need for the battery pack.
- terrybritton
- Posts: 1117
- Joined: Thu Jun 04, 2015 8:45 am
- Primary DAW OS: Windows
- Location: Elizabeth City, NC
- Contact:
Re: Windows 10. Switch from line to mic
I have a couple old hi-impedance tape recorder mics lying around here somewhere - I'll do some tests with them and see if I can get enough gain out of that "instrument" input from those trims. I'm surprised to hear you cannot.waz wrote:The mic is a straight up dynamic microphone with no pack. I was hoping to use the gain controls from the MOTU to eliminate the need for the battery pack.
Terry
Computer: Sweetwater CS400v7 Intel Core i7-10700K CPU @ 3.80GHz | 64Gigs RAM | Windows 11 Pro x64 |
MOTU 828 mk3 hybrid
DAWs & Live: MOTU Digital Performer 11.31 | Cantabile Performer 4
Keyboard Synths: Kawai K5000s, Korg Wavestation
Controllers: NI Komplete Kontrol S-88 Mk3 & S-49 Mk2; Maschine Mk3 & JAM;
Akai MPK249 & 225, Alesis QX49, Behringer BCF2000 & FCB1010
Rack Modules: Ensoniq ESQm, Yamaha TX81Z, Wavestation SR
Tutorials: https://youtube.com/@CreatorsMediaTools
MOTU 828 mk3 hybrid
DAWs & Live: MOTU Digital Performer 11.31 | Cantabile Performer 4
Keyboard Synths: Kawai K5000s, Korg Wavestation
Controllers: NI Komplete Kontrol S-88 Mk3 & S-49 Mk2; Maschine Mk3 & JAM;
Akai MPK249 & 225, Alesis QX49, Behringer BCF2000 & FCB1010
Rack Modules: Ensoniq ESQm, Yamaha TX81Z, Wavestation SR
Tutorials: https://youtube.com/@CreatorsMediaTools