Hi,
Probably quite a simple question.... My set up is all synths and I want to use all the inputs that I can simultaneously. I read in the manual for my 828mk3 hybrid...
"Do not connect a +4 (line level) XLR cable to
the front-panel inputs (because of the preamps).
Use a rear-panel quarter-inch input instead."
Now, all I want to know is: can I use these front panel mic/instrument inputs with unbalanced 1/4 inch jacks from normal synths (perhaps my eurorack) without breaking from intended function? If I set the trim for these inputs to 0db and keep the input volume low then they are just as "good" as the rear panel inputs for synths?
Make this simple for me!
Cheers, David
828mk3 hybrid question... Synths->Mic inputs?
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
- terrybritton
- Posts: 1117
- Joined: Thu Jun 04, 2015 8:45 am
- Primary DAW OS: Windows
- Location: Elizabeth City, NC
- Contact:
Re: 828mk3 hybrid question... Synths->Mic inputs?
Yes, using quarter-inch unbalanced plugs with those is fine, and you can use it for synths by backing off the trim on the Inputs tab to minus -24db (or even -12 will likely do) before you plug it in. Make sure that setting carries over into all your saved configs, of course.
Computer: Sweetwater CS400v7 Intel Core i7-10700K CPU @ 3.80GHz | 64Gigs RAM | Windows 11 Pro x64 |
MOTU 828 mk3 hybrid
DAWs & Live: MOTU Digital Performer 11.31 | Cantabile Performer 4
Keyboard Synths: Kawai K5000s, Korg Wavestation
Controllers: NI Komplete Kontrol S-88 Mk3 & S-49 Mk2; Maschine Mk3 & JAM;
Akai MPK249 & 225, Alesis QX49, Behringer BCF2000 & FCB1010
Rack Modules: Ensoniq ESQm, Yamaha TX81Z, Wavestation SR
Tutorials: https://youtube.com/@CreatorsMediaTools
MOTU 828 mk3 hybrid
DAWs & Live: MOTU Digital Performer 11.31 | Cantabile Performer 4
Keyboard Synths: Kawai K5000s, Korg Wavestation
Controllers: NI Komplete Kontrol S-88 Mk3 & S-49 Mk2; Maschine Mk3 & JAM;
Akai MPK249 & 225, Alesis QX49, Behringer BCF2000 & FCB1010
Rack Modules: Ensoniq ESQm, Yamaha TX81Z, Wavestation SR
Tutorials: https://youtube.com/@CreatorsMediaTools
Re: 828mk3 hybrid question... Synths->Mic inputs?
Thanks, Terry,
Forgot to check back for a reply until now, but cheers, that's exactly what I wanted to know.
Forgot to check back for a reply until now, but cheers, that's exactly what I wanted to know.