Hello,
When I attempt to pass audio from an external device to the 828 via the SPDIF input,I hear loud static when the sample rate is set to 88.2. I set up CueMix for a SPDIF loop and I hear cracks and pops with no audio playing and loud static when audio is playing. No other sample rate behaves this way. Any assistance is greatly appreciated.
828mk3 Hybrid SPDIF noise at 88.2khz
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
- mikehalloran
- Posts: 15134
- Joined: Sun Jan 25, 2009 5:08 pm
- Primary DAW OS: MacOS
- Location: Sillie Con Valley
Re: 828mk3 Hybrid SPDIF noise at 88.2khz
What is your clock source?
DP 11.31; 828mkII FW, micro lite, M4, MTP/AV USB Firmware 2.0.1
2023 Mac Studio M2 8TB, 192GB RAM, OS Sonoma 14.4, USB4 8TB external, M-Audio AIR 192|14, Mackie ProFxv3 6/10/12; 2012 MBPs Catalina, Mojave
IK-NI-Izotope-PSP-Garritan-Antares, LogicPro X, Finale 27.4, Dorico 5.2, Notion 6, Overture 5, TwistedWave, DSP-Q 5, SmartScore64 Pro, Toast 20 Pro
2023 Mac Studio M2 8TB, 192GB RAM, OS Sonoma 14.4, USB4 8TB external, M-Audio AIR 192|14, Mackie ProFxv3 6/10/12; 2012 MBPs Catalina, Mojave
IK-NI-Izotope-PSP-Garritan-Antares, LogicPro X, Finale 27.4, Dorico 5.2, Notion 6, Overture 5, TwistedWave, DSP-Q 5, SmartScore64 Pro, Toast 20 Pro
Re: 828mk3 Hybrid SPDIF noise at 88.2khz
Thanks for the reply. I've used internal and SPDIF clock settings both with the same result at 88.2.