Hello,
I did some research on the forum and was hoping to hear from same configuration users.
Basically, I received my Express XT this morning and I got stuck note in a very basic config.
I copy here what I sent to Motu support so you have the full info:
*******************************
I just received my Motu MIDI Express XT.
Installed new Drivers from website : MOTUSetupMIDI57483
New Firmware from website : MIDI Express XT Updater 3.0.28
I have a working Dell XPS 8700 computer for audio with win 8.1 64 bits.
I connected the Express XT to a *2.0 USB port* (tried also a 2.0 hub)
I use ableton, enabled only output MIDI 2 in soft. used the default routing on Express XT software (clockworks I think). I plugged a cable from output 2 to the IN of my synth. DSI Evolver. No output from synth is plugged to avoid MIDI loops.
I play couple notes from my controller in LIVE (Push) routing to only XT port 2. Stuck note appear rapidly and then unstuck themselves most of the times after 2 or 3 seconds, sometimes its completely stuck until I change preset from synth.
*********************
Thank you for reading.
Any help appreciated.
Express XT win 8.1 64 bits Users ?
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
-
- Posts: 70
- Joined: Tue Jul 21, 2015 2:57 am
- Primary DAW OS: Windows
Re: Express XT win 8.1 64 bits Users ?
Did you find a fix for that? I too have the same issue