Hey Guys,
I had successfully set up 2 MOTUs by firewire
My Setup
----------
Win 7 64 Bit , Two Motus 828 MK II
LATENCY
-------------
The latency is ridiculously High with firewire ,
Input : 12.6 / Output :23 / Buffer :512
When I tried different sampling rates , I started getting pops/cracks etc..
ADAT OPTICAL
------------------
So.....
Ive decided to go the ADAT Optical way and check how well the latency performs.
MY Questions are :-
Setup
1)What physical ADAT OPTICAL cable connections would I use?
MOTU (#1) > FW > My Computer (Correct?)
MOTU (#1) : ADAT OPTICAL IN or OUT ?
MOTU (#2) : ADAT OPTICAL IN or OUT ?
Features
2) By Going the ADAT Optical way would My MIDI / and all Channels (IN/Out) be available ?
What do I give up if I go down this route Vs Firewire?
2) Time Clock
Ive heard people say use WordClock
Is this necessary ? , if so what is the physical word clock cable connection setup between the 2 Motus ?
Thanks For your help
HELP SETTING UP 2 MOTU 828 MK IIs - ADAT OPTICAL
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
- playmusician
- Posts: 2
- Joined: Thu Jan 22, 2015 11:10 pm
- Primary DAW OS: Windows