Win7/64 w/Intel USB 3.0 xHCI driver

Moderator: James Steele

Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Post Reply
jonasd914
Posts: 9
Joined: Sat Nov 02, 2013 9:10 pm
Primary DAW OS: Windows

Win7/64 w/Intel USB 3.0 xHCI driver

Post by jonasd914 »

Hi,
I have a Dell Latitude E6540 laptop (win7/64) and it has 4x SS/USB3 ports.
Cuemix does not want to communicate/control my MOTU 4Pre unless I completely disable USB3 in the BIOS.

When I do that, all ports are now USB2 only and CueMix works fine.

I would LIKE to see if its possible to disable the USB3 xHCI driver for a single port on the machine somehow.
I found some information that leads me to believe it may be possible, but I can't find any more information about it. I was curious if anybody has explored this and if they know how to do it?

here's the info I found:
http://superuser.com/questions/719079/u ... b-3-0-xhci

And, in the post is says: "This register allows per-port configuration, to either direct it to the XHCI (USB 3.0) or EHCI (USB 2.0) controller."
Top
Post Reply

Return to “MOTU Hardware & Windows”