Hi,
I have a Dell Latitude E6540 laptop (win7/64) and it has 4x SS/USB3 ports.
Cuemix does not want to communicate/control my MOTU 4Pre unless I completely disable USB3 in the BIOS.
When I do that, all ports are now USB2 only and CueMix works fine.
I would LIKE to see if its possible to disable the USB3 xHCI driver for a single port on the machine somehow.
I found some information that leads me to believe it may be possible, but I can't find any more information about it. I was curious if anybody has explored this and if they know how to do it?
here's the info I found:
http://superuser.com/questions/719079/u ... b-3-0-xhci
And, in the post is says: "This register allows per-port configuration, to either direct it to the XHCI (USB 3.0) or EHCI (USB 2.0) controller."
Win7/64 w/Intel USB 3.0 xHCI driver
Moderator: James Steele
Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows