Cubase le 5 and 2408 MkIII

Moderator: James Steele

Forum rules
Discussion related to installation, configuration and use of MOTU hardware such as MIDI interfaces, audio interfaces, etc. with Windows
Post Reply
mj023
Posts: 2
Joined: Sun Apr 20, 2014 7:24 pm
Primary DAW OS: Windows

Cubase le 5 and 2408 MkIII

Post by mj023 »

Will Cubase LE5 see my 2408 Mark III interfaces and work with them.
rickorick
Posts: 302
Joined: Sun Jul 30, 2006 10:19 am
Primary DAW OS: MacOS

Re: Cubase le 5 and 2408 MkIII

Post by rickorick »

Try it and see, I would think it would the MOTU stuff is made to work with almost everything.
If you know where your configure hardware driver is in windows it should be there and all you should have to do is click on it and then find the outputs in Cubase and you should be on your way. Keep trying stuff till it works. Oh and you know Read The Manual, that always helps.
Good Luck
Used 2012 Mac Pro 3.33 6 Core 16g ram 10.8.5 DP 7.24
User avatar
bayswater
Posts: 11923
Joined: Fri Feb 16, 2007 9:06 pm
Primary DAW OS: MacOS
Location: Vancouver

Re: Cubase le 5 and 2408 MkIII

Post by bayswater »

Why wouldn't it? Making sure it works with your particular version of Windows is probably more important. Earlier versions of Cubase worked with my 2408-2, and Cubase 7 works with my 828-3, but that's because the drivers work with the OS.

Doing a general search at the Cubase forum for "2408" might help.
2018 Mini i7 32G 10.14.6, DP 11.3, Mixbus 9, Logic 10.5, Scarlett 18i8
mj023
Posts: 2
Joined: Sun Apr 20, 2014 7:24 pm
Primary DAW OS: Windows

Re: Cubase le 5 and 2408 MkIII

Post by mj023 »

Thank you for your answers ... I will try it. I hope to be able to use the optical 24 channel inputs in each of my 2408 Mark IIIs ... does that sound possible in Cubase LE5 also.
User avatar
bayswater
Posts: 11923
Joined: Fri Feb 16, 2007 9:06 pm
Primary DAW OS: MacOS
Location: Vancouver

Re: Cubase le 5 and 2408 MkIII

Post by bayswater »

If the drivers for the 2048-3 are working, any of the inputs or outputs will work as well as any others. Cubase itself has no awareness of the type or format of the inputs, it just sees what the driver presents. I think it's called the Device Setup window in Cubase -- that's where you link up Cubase to the 2048 and tell it what channels to use.
2018 Mini i7 32G 10.14.6, DP 11.3, Mixbus 9, Logic 10.5, Scarlett 18i8
Post Reply