Search found 31 matches
- Thu Feb 06, 2014 6:56 pm
- Forum: MOTU Hardware & Windows
- Topic: Simple use of CueMix that has me stumped
- Replies: 2
- Views: 507
Re: Simple use of CueMix that has me stumped
CueMix is for routing the zero-latency input signals directly to any output with up to 4 (at least for 828mkII) separate mixes without having to be processed by the computer. So, no I don't think you can do this in CueMix. I don't use Sound Forge, but I would think you should not have to duplicate t...
- Tue Jan 28, 2014 7:02 pm
- Forum: MOTU Hardware & Windows
- Topic: Original 896 with Windows 7 DISASTER! Help!
- Replies: 4
- Views: 848
Re: Original 896 with Windows 7 DISASTER! Help!
You did not mention if you are 32bit or 64bit or if you have installed the latest driver. My 828mkII works just fine in Windows 7 64 bit with Cubase or Reap er. Not sure why you would need $100s in firewire cables. I've never had a problem with cheap ones. Firewire is a digital protocol and unless y...
- Tue Jan 28, 2014 6:55 pm
- Forum: MOTU Hardware & Windows
- Topic: Using 828 mk2 and mk1 in combination
- Replies: 2
- Views: 435
Re: Using 828 mk2 and mk1 in combination
Also, for 8 channels you will have to record at 48 kHz or less. Only 4 channels at 96 kHz.
- Tue Jan 28, 2014 6:31 pm
- Forum: MOTU Hardware & Windows
- Topic: Flat Top Waveforms in Cubase. 828mkII & 8Pre.
- Replies: 3
- Views: 763
Re: Flat Top Waveforms in Cubase. 828mkII & 8Pre.
This issue definitely has nothing to do with clipping or overloading the inputs. Waveforms are still flat topped even at low levels. I thought I had resolved this issue by turning the phantom power off then back on for the condenser mics and adjusting the settings of the tube preamp for the bass gui...
- Fri Dec 13, 2013 8:18 pm
- Forum: MOTU Hardware & Windows
- Topic: Flat Top Waveforms in Cubase. 828mkII & 8Pre.
- Replies: 3
- Views: 763
Re: Flat Top Waveforms in Cubase. 828mkII & 8Pre.
Thanks. I'll check that out at next band practice, maybe this Sunday. I wouldn't think that this would be the case with the condenser mics, but definitely could be the case with the bass guitar going through the external preamp.
I appreciate your feedback.
I appreciate your feedback.
- Fri Dec 13, 2013 1:38 pm
- Forum: MOTU Hardware & Windows
- Topic: 893mk3 and 8pre connection question
- Replies: 1
- Views: 327
Re: 893mk3 and 8pre connection question
The 8Pre when used as the interface will accept 8 digital inputs via ADAT (48kHz max). So long as you can set your inputs on the 828 to ADAT Out. 1 input pair panned hard left & right per mix bus assigned to an ADAT Output pair.
Here MOTU explains how
Here MOTU explains how
- Fri Dec 13, 2013 12:50 pm
- Forum: MOTU Hardware & Windows
- Topic: about 4pre and CueMix
- Replies: 11
- Views: 3101
Re: about 4pre and CueMix
You can probably set up the DAW on one mix bus, and the Incoming signal on another mix bus. Then just change which mix bus your headphones are following. It's not one click, but the sound will switch completely from one to the other. I don't think I have ever heard of exactly the feature you are wan...
- Fri Dec 13, 2013 9:08 am
- Forum: MOTU Hardware & Windows
- Topic: Motu Audio Express sudden no sound problem
- Replies: 17
- Views: 7380
Re: Motu Audio Express sudden no sound problem
Trent, you should probably post this in the MOTU with Mac forum. I have an 828mkII and the only time the sample rate led flashes is when my keyboard is turned off. This is because I have the clock sync set to external (SPDIF) so that I can record my keyboard digitally in sync to avoid digital artifa...
- Fri Dec 13, 2013 8:47 am
- Forum: MOTU Hardware & Windows
- Topic: Flat Top Waveforms in Cubase. 828mkII & 8Pre.
- Replies: 3
- Views: 763
Flat Top Waveforms in Cubase. 828mkII & 8Pre.
Sometimes I get a waveform in which the top is flat. As if the upward peaks hit a brickwall limiter, but the downward peaks are normal. This occurred using Cubase SX2 with the 828mkII and 8Pre. I don't know if this is a DAW issue or hardware issue. At first this phenomenon only occurred with two ide...
- Fri Aug 20, 2010 2:03 pm
- Forum: MOTU Hardware & Windows
- Topic: Motu 828 MK2 Firewire and driver 4.0.4.2546 problems
- Replies: 3
- Views: 2684
Re: Motu 828 MK2 Firewire and driver 4.0.4.2546 problems
I had a lot of problems with this in Vista32. Mostly b/c I did not uninstall the previous drivers. When I finally got it straightened out, by manually deleting all traces I could find of anything MOTU, the install worked fine. Although, I never could get the old installer removed from the Programs a...
- Fri Aug 20, 2010 9:05 am
- Forum: MOTU Hardware & Windows
- Topic: NEW STICKY FOR DRIVER DOWNLOADS!!
- Replies: 74
- Views: 185928
Re: NEW STICKY FOR DRIVER DOWNLOADS!!
Here is the 3.6.8.1394 Firewire (& USB?) driver for XP 32bit. http://cid-c7ed7f901cf2b811.skydrive.live.com/redir.aspx?resid=C7ED7F901CF2B811!131&Bpub=SDX.Docs&Bsrc=GetSharingLink What was the last Vista32 driver before 4.0.4.2546? Can anyone post a link please? I never had problems with...
- Thu Jan 24, 2008 2:06 pm
- Forum: MOTU Hardware & Windows
- Topic: Micro Express, MIDI filtering & merging.
- Replies: 3
- Views: 345
- Fri Jan 18, 2008 10:00 pm
- Forum: General Recording
- Topic: Homestudio
- Replies: 7
- Views: 659
- Thu Jan 17, 2008 4:41 pm
- Forum: General Recording
- Topic: M-Audio Axiom 49 vs Emu Xboard 49.
- Replies: 0
- Views: 240
M-Audio Axiom 49 vs Emu Xboard 49.
I have heard some people and read some reviews that prefer Emu Xboard over the Axiom.
What is your take?
What is your take?
- Thu Jan 17, 2008 3:22 pm
- Forum: General Recording
- Topic: Best compact MIDI keyboard controller?
- Replies: 25
- Views: 2298
So, it is 2008 and I ended up buying the Alesis Photon X25. Unforunately, I didn't come back here and re-read my own topic, and forgot that the Photon doesn't have AT at all! I saw the price drop and snatched it up. The ultimate deciding factor was price since I'm on a limited budget and need other ...